> Can you give an exact description (even if it has been done before)
> of your NIC card and system type.
Description of my NIC :
3c509b-TPO
ASSY:03-0020-006 REV-A
3com etherlink III
on the chip itself
3com 40-0130-004
9705S 16003554
LUCENT 40-01304
When I write "Enable or Disable", I mean I tested both :
Boot on a dos floppy, launch 3c5x9cfg.exe
--> configure NIC --> Plug And Play Capability --> Enable or Disable
If PnP Disable --> I/O Base : 300h and IRQ : 10
Transceiver Type : On board TP
Network Driver Optimization : tested the three options (Dos client,
Windows, server)
System : IBM Personal Computer 330 (Pentium 166, 80Mo RAM)
Model 6577-9BT (Latest BIOS downloaded)
In the BIOS config, I tested different solutions :
- Plug And Play --> Set Device Node --> Enable or not (The only part of
PnP you can touch in this BIOS)
- Addr 300h available or not
- IRQ 10 available or not
I found an old HP Vectra (486dx4/100), and it works on that machine with
the same NIC !!!
Romain Surleau.
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
