Il giorno Sat, 23 Mar 2002, Wouter DeBacker cosė ha scritto: |From: Wouter DeBacker <[EMAIL PROTECTED]> |To: [EMAIL PROTECTED] |Date: Sat, 23 Mar 2002 01:49:18 +0100 |Subject: Re: RE: [Ltsp-discuss] No boot rom |
[...] | |It seems to me that your problem is related to the setup of the |IO-address and the IRQ of your 3c509B-TPO. If two peripherals |are using the same address and/or the same IRQ then one of them |is bound not to be recognized. | |Either check the jumpers and eventually change them or, if the |card is jumperless then use the setup utility that came with it. |On a stripped 486 terminal IO=300H and IRQ=10 could be the right |ones. | Please find at the following URL the 3com setup/testing tool for 3c509 EtherLink III cards, running under dos: ftp://ftp.ihg.uni-duisburg.de/Hardware/3com/3c5x9n/3C5X9CFG.EXE 3c509 are jumperless cards. I quote from the Ethernet-HOWTO: 3c509B users should use either the supplied DOS utility to disable the plug and play support, and to set the output media to what they require. The linux driver currently does not support the Autodetect media setting, so you have to select 10Base-T or 10Base-2 or AUI. Sandro -- Bellum se ipsum alet. La guerra nutre se stessa. Livio, "Ab urbe condita", XXXIV,9 _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
