On Wed, 2007-09-19 at 00:49 -0500, Jim Kronebusch wrote:
> > I have a working xorg.conf on a 'snow iMac' from fc7
> > I am trying to use a different 'snow iMac' on ltsp.
> > So I gather I should cp my working_xorg.conf
> > to /opt/ltsp/ppc/etc/XF86Config-4.snow and simply set
> > [00:03:93:92:88:98]
> >          XSERVER            = fbdev
> >          XF86CONFIG_FILE    = XF86Config-4.snow
> > 
> > I will try that in the morning...that's what I interpret your suggestion
> > to be telling me.
> 
> Exactly what I am suggesting.  Post back how it goes.  Oh, I see an error 
> here, but the
> custom file in 
> /opt/ltsp/ppc/etc/X11/XF86Config-4.snow
> Maybe omitting the X11 above was just a typo.
> 
> > yes, I am able to look at /tmp/XF86Config.1 but it always has (going
> > from memory now)...
> > 
> > Section "Device"
> >         Driver          "192.168.3.11"
> > 
> > which ain't ever gonna work
> 
> Sure won't, very odd.  Try commenting out the XSERVER line in the default 
> section, that
> probably doesn't need to be there.  But the mac address specific section for 
> all I know
> should be overriding that anyhow, which makes me wonder if it is pulling down 
> the custom
> file.  Was the motherboard on that mac ever swapped?  I know macs have the 
> handy mac
> address printed on the case, but I have been burned in the past referring to 
> that not
> knowing the motherboard was swapped and that it now had a different mac 
> address
> (basically grasping at straws here).  
> 
> Anyhow give that a try.
----
by the way...thanks for the help, I'm not sure I would have gotten it
without all your help

-- 
Craig White <[EMAIL PROTECTED]>


-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_____________________________________________________________________
Ltsp-discuss mailing list.   To un-subscribe, or change prefs, goto:
      https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help,   try #ltsp channel on irc.freenode.net

Reply via email to