On 11/20/2013 12:37 PM, John Hupp wrote:
On 11/20/2013 12:24 PM, John Hupp wrote:
On 11/11/2013 10:31 AM, Jay Goldberg wrote:
On Fri, Nov 8, 2013 at 3:48 PM, John Hupp <l...@prpcompany.com
<mailto:l...@prpcompany.com>> wrote:
On 11/8/2013 1:42 PM, Jay Goldberg wrote:
On Fri, Nov 8, 2013 at 11:51 AM, John Hupp <l...@prpcompany.com
<mailto:l...@prpcompany.com>> wrote:
On 11/7/2013 4:23 PM, David Burgess wrote:
On Thu, Nov 7, 2013 at 1:18 PM, John Hupp
<l...@prpcompany.com <mailto:l...@prpcompany.com>> wrote:
On 11/6/2013 5:53 PM, John Hupp wrote:
> I finished a new installation of LTSP-PNP on Lubuntu
13.10, but I find
> that clients won't boot.
>
> After the Plymouth splash screen, a text screen reads:
>
> Error: socket failed: connection refused.
> Exiting.
Forgive me for not combing through all of the machine
output, but at a glance your symptoms look like something
I have encountered where the nbd server does not start
automatically on the server. The quick fix was to start
the service, and then I don't recall if it started
automatically after a reboot or if I had to turn that on
in a config file somewhere. Try 'netstat -lt' to see what
ports you're listening on.
db
Thanks for a good lead (though it leads to more questions
rather than an immediate solution).
I find that nbd-server is running, but comparing the output
of 'netstat -lt' on a Lubuntu 13.04 LTSP server that works
fine, and the misbehaving 13.10 server, I find that on
13.04 nbd-server listens on *: 60603, but on 13.10 it
listens on *:nbd.
Otherwise the output is the same for tcp on both servers (I
don't list the tcp6 results):
tcp 0 0 *:9571 *:* LISTEN
tcp 0 0 localhost:55213 *:*
LISTEN
tcp 0 0 Lubuntu:domain *:*
LISTEN
tcp 0 0 192.168.1.117:domain
*:* LISTEN
tcp 0 0 localhost:domain
*:* LISTEN
tcp 0 0 *:ssh *:* LISTEN
tcp 0 0 localhost:ipp *:*
LISTEN
The nbd-server configuration file
(/etc/nbd-server/conf.d/ltsp_i386.conf) has the same
contents on both installations.
The script that launches nbd-server appears to be
/etc/init.d/nbd-server, and it does not specify ip
addresses or ports to listen to. At least for the ip
addresses,
http://manpages.ubuntu.com/manpages/saucy/man1/nbd-server.1.html
states that when the ip address parameter is not specified,
nbd-server will listen on all local addresses on both IPv4
and IPv6.
I don't know how to interpret the difference in how
nbd-server is listening.
Forgive me if I seem out of the loop, I have not used LTSP in
over a year
However, it does look like a port issue. Looking at my Debian
system, /etc/services reports that NBD is on port 10809
nbd 10809/tcp # Linux Network Block Device
And in the man page for nbd-server for the -port option:
The port on which to listen for new-style
nbd-client connections. If not specified, the
IANA-assigned port of 10809 is used.
The netstat output will replace port numbers with friendly
names if it can match up ports with entries in /etc/services
I recall that LTSP does use its own NBD server on a
non-standard port with a config file in a non-standard location
as well, so it would seem that your 13.10 system should not
show listening on *:nbd.
Check that the nbd-server is running on the port that the
client expects. "Connection refused" would support that the
port the client is connecting to is "closed".
For fun, also post the output of # iptables -L to make sure
there are no firewall rules filtering things.
Cheers,
--
Jay Goldberg | AvianBLUE Network Systems
I don't know how to check that the nbd-server is running on the
port that the client expects. Can you tell me?
But perhaps related to this, even though the topic was NBD Swap,
Alkis Georgopoulos wrote in
http://osdir.com/ml/LTSP-cluster-thin-clients/2012-08/msg00047.html
that for Ubuntu 12.04, the NBD_PORT section [for NBD Swap] is
obsolete since NBD is now using the IANA assigned port 10809 and
name-based exports instead of port-based.
------------------------------
Iptables -L shows the default, no-rules setup:
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
Unfortunately I have not run LTSP in awhile, yet alone the new
"simple" LTSP. As I recall, the config files for the standalone NDB
server for LTSP is stored in /etc/ltsp/ and when you change config
files you must update the ltsp image because the NDB server
connection happens very early in the boot process and needs to be
hard coded in the client's initramfs.
I can get a test environment running tomorrow if you still would
like assistance.
--
Jay Goldberg
Other work has been demanding attention, but I'm returning to this
today a little.
In /etc/ltsp I only find dhcpd.conf, update-kernels.conf and
ltsp-update-image.excludes -- with none of those containing anything
that seems to bear on nbd-server configuration.
There are also these:
/etc/nbd-server/config
/etc/nbd-server/conf.d/ltsp_i386.conf
/etc/nbd-server/conf.d/swap.conf
But again, I don't see anything there that would seem to affect where
nbd-server is listening.
So yes, if you're still game for it, I'm happy for all the further
help I can get.
A little later I'm thinking that I will install Lubuntu 13.10 (with no
updates and no other programs installed) + LTSP_PNP in VMWare Player
and test that. Of course if that worked it should give me some
clues. But if someone else in possession of Ubuntu 13.10 were to run
a similar test, that could help to narrow the field of inquiry to
something in LXDE. I know that there have been changes to LXSession
manager and related parts in 13.10, but as far as I know these would
not bear on nbd-server (which I have seen above is running -- at least
one instance of it).
That Lubuntu vs Ubuntu 13.10 is blunt-object troubleshooting however,
and I'm open to finer ideas if someone can tell me how.
For instance, since the client machine has an initramfs that seems to
be working at the point of failure (there is a working prompt), can I
run something useful from there?
I installed Lubuntu 13.10 (with no updates and no other programs) +
LTSP-PNP in a VMWare Player virtual machine, but when tested with a
client, its PXE booter fails with the error: "No boot filename received."
So in this setup I so far find out nothing useful. At least in the real
metal install I have a clean PXE boot.
If someone can help me get past this obstacle I may be able to find out
a something.
-------------------------------
I also copied and pasted the output of the LTSP install commands into a
file which you can download at
http://www.prpcompany.com/ltsp/vm_ltsp_install_log.zip (I tried just
pasting it in here but it made the post run afoul of a size limit.)
Perhaps of immediate interest from that log is the output of the
installation of ltsp-server-standalone. It includes this:
########################################
Setting up nbd-server (1:3.3-3ubuntu1) ...
Creating config file /etc/nbd-server/config with new version
Adding system user `nbd' (UID 110) ...
Adding new group `nbd' (GID 119) ...
Adding new user `nbd' (UID 110) with group `nbd' ...
Not creating home directory `/etc/nbd-server'.
** (process:3234): WARNING **: Could not parse config file: The config
file does not specify any exports
** Message: No configured exports; quitting.
nbd-server.
########################################
Is that normal?
------------------------------------------------------------------------------
Shape the Mobile Experience: Free Subscription
Software experts and developers: Be at the forefront of tech innovation.
Intel(R) Software Adrenaline delivers strategic insight and game-changing
conversations that shape the rapidly evolving mobile landscape. Sign up now.
http://pubads.g.doubleclick.net/gampad/clk?id=63431311&iu=/4140/ostg.clktrk
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
