I'd really love the ability to output the display from the M100 to a screen, even if it was composite. Modern day DVI! Hehe
Sent from my iPad > On 24 Aug 2018, at 8:15 pm, Fugu ME100 <b4me...@hotmail.com> wrote: > > That sounds great. What sort of current draw are you getting? Quite > curious. > > From: M100 <m100-boun...@lists.bitchin100.com> on behalf of Brian White > <bw.al...@gmail.com> > Sent: Friday, August 24, 2018 20:12 > To: m...@bitchin100.com > Subject: Re: [M100] New Age Digital Storage Box (NADSBox) > > I was playing with the Teensy 3.6 some more last night and got it waiting & > responding to commands by serial (the built-in ftdi usb-serial not via max232 > yet), reading/writing to files in a fat32 fs on the sd, blinking the on-board > led during drive activity, and displaying text on a tiny 128x64 0.96 inch > oled display via i2c. > > All while sitting at a counter at a diner. > > Because it didn't need anything but a laptop, usb cable, and the chip stuck > on the end of the cable, and 4 jumper wires just for the oled display which > was just for play anyway, probably wouldn't actually want that on the > finished device. > > These arduino libraries and built in examples make it all pretty easy to get > started. > > And teensy has an rtc built-in too. Needs another battery, but a cr2032 can > apparantly keep the rtc going for about 17 years, so, not a problem. > > This 32 bit 180mhz cpu is overkill, but it's just handy having the sd card > reader and usb port already built in. The cpu can be underclocked in software > but I don't know if it goes all the way down to 4!