What about software flow control? On Sun, 9 Jul 2023 at 15:40, Gregory McGill <arcadeshop...@gmail.com> wrote:
> there's no hardware flow control on the 100 with telcom > use a better terminal and hardware flow control at any baud rate over 2400 > > > On Sun, Jul 9, 2023 at 3:19 PM Jesse Bertier <berti...@gmail.com> wrote: > >> First time getting my hands on a model T. I am attempting to connect to >> a TNC at 9600 baud. I have both matched for 8,N,1 and 9600 baud. TNC >> works with other PCs. I’m using TELCOM and set the parameters correctly. >> What happens at 9600 baud is the text coming into the m100 is garbled >> mostly and on occasion some valid words come across. When I set both to >> 300 baud, works perfectly. It seems to be problematic if there’s a solid >> block of text coming in, like a string of 20-30 words for example. >> >> Before I dig into the problem with the service manual and get out the >> scope, does anyone know if these are supposed to work well at 9600 or up to >> 19,200 ? Or, does the buffer or machine get overloaded at higher rates? >> Is TELCOM the issue? >> >> Sent from my iPhone > >