No, I didn't use the Cura 2.1.3. I am using the latest version 2.7. I will try with the 2.1.3 version once
On 31 Aug 2017 18:11, "Bas de Bruijn" <b...@basdebruijn.com> wrote: > > On 31 Aug 2017, at 14:11, Pranav Pandey <pranav...@gmail.com> wrote: > > It clearly states you are missing a ‘P’ argument >> so take a look at your g-code where M190 is used and see if it has a P >> argument >> > > Yes, It was the first thing I did. I forgot to mention the g-code. > > M190 S60 > > This is the one generated by Cura plugin with Mach3 flavor. I want to try > running this without modifying this g-code. > > > No you don’t want to do that. > > You want to have the g-code file with correct output, and thus correct > input for Machinekit. Did you correctly install machinekoder his cura > plugin? That plugin (with cure 2.1.3) should take care of that. > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
