>From PCW: The fact that it reads 0 as a version number means there is likely > something wrong with the firmware source. > That is, the driver cannot communicate with the embedded CPU that manages > he communications. > There never was a released version 0. I would expect version 43 if the > source is less than 5 > or so years old. > > The initial baud rate should be 2.5 MBaud (400 ns per bit) I suspect > something wrong with the clock > generation (the actual hardware clock does not match the CLKMED constant)
> The version numbers in the pinout file are hardware versions of the > individual modules. > The sserial version that the driver reads out is the software version (of > the code that runs on the sserial interface CPU) This should be 43 decimal, > reading 0 probably means that the CPU is not responding or some other > bitfile /firmware issue > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/9e682d3f-1691-4077-a9a9-ade71cbfebeb%40googlegroups.com.