I do believe it is a Garrett one....
I actually have a source for the endplates, just have to follow it up.
A friend bought one for his Rex... and he had them done. From
memory I think he said it cost him about $120odd....
I was thinking of getting a couple of meter's of it machined up....
I will let you know what I come up with...
Cya
JamesF
andrew smith wrote:
> Good luck with the intercooler. From the pic it looks like the older Garrett
> type with the tubes machine welded to the end plates.Cutting them down to 2
> or 3 is easy but making them not as wide is a problem. I've done some and
> there a lot of work unless you can find someone who makes end plates to
> suit, even with these its still alot of work cleaning up the tubes after
> there cut.The later model Garrett cores are vacum glued to the end plates
> and are a lot easier to pull apart. Lately I've been using the mercedes or
> the mitsubishi truck cores as these are only 500mm wide at the plates. The
> last mitsi core i picked up is the same as an evo core only 3 times as high.
> If you find anyone who makes end plates to suit the garrett cores cheap let
> me know as making them by hand isn't worth it.
> Andrew Smith
> jamesf wrote:
>
> > I just picked up my new intercooler... I think I am going to need a hand
> >
> > installing it.... Not sure where I will mount the headlights (or the
> > grill,
> > bumper, blinkers radiator etc ... :)
> >
> > I tried to find a bigger one but this little one was all I could find...
> >
> > (it's got to impress all the rice boys :)
> > Now maybe if I weld two together like they did with those Piazza
> > intercoolers in Hot4s......
> >
> > http://www.ozdat.com/ozdat/newintercooler.jpg
> >
> > No, seriously... should be able to cut it up to make 2 or 3 very nice
> > intercoolers
> >
> > Bit of a bugger to get home in the dat though. The thing just fitted
> > across the back
> > seat.... pressed up against both doors ... just squeezed it in ;)
> >
> > Cya
> > JamesF
> > OZDAT Online
> >
> > --
> > ________________________________________________________________________
> >
> > James Fitness
> > Director
> > Data Scribe Australia Pty Ltd
> > http://www.datascribe.com.au
> > Computers and Supplies
> >
> > OZDAT Online
> > http://www.datascribe.com.au/ozdatonline/index.htm
> >
>
--
________________________________________________________________________
James Fitness
Director
Data Scribe Australia Pty Ltd
http://www.datascribe.com.au
Computers and Supplies
OZDAT Online
http://www.datascribe.com.au/ozdatonline/index.htm
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
