Mark,
It think it would be possible to fire both plugs in one cylinder at the same
time by changing the trigger timing to the exhaust coil to the same as that
for the inlet plug.
The inlet and exhaust rotor buttons are at an included angle of 135 degrees
and can fire both at the same time if triggered at the same time.
Cheers
Feral Errol
mailto:[EMAIL PROTECTED]
http://www.datrats.com.au/
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of mark krawczuk
Sent: Friday, April 20, 2001 1:17 PM
To: [EMAIL PROTECTED]
Subject: Re: Z18 distributor
Hello Errol
On 20-Apr-01, you wrote:
> Mark,
> The Z dissy fires the inlet plug first then the exhaust plug to reduce
> emissions. They only work up till 3500 Rpm.
>
> Cheers
>
> does the z18 twin plug distributor fire both plugs at the same time? or
> first one plug then then the other? would it be better if both pluds did
> fire at the same time?
>
> mark
>
>
hi, i know this sounds a bit iffy, but what about a std type distributor,
and splice another high tension lead into the other to fire both plugs at
the same time?
is there any other way to do this? (fire both plugs at the same time?
mark
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
