Tim,
S2 dizzies are usually $50-$100 from wrecker but sometimes you can get them
cheaper.Dont know where you are but mandurah wreckers have them for $100 and
he'll probably throw in a coil to suit.Then you would need to change the
module,lock the dizzy solid and modify the rota button like george suggested.
The guys from link should be able to tell you everything you need to do.
Andrew Smith
Tim Albany wrote:
> thanks for the info Andrew, the dizzy i have hasn't a module outside
> it is all inside but the s2 dizzy is it hard to get a good one and
> how much would you expect for one.
>
> >Tim,
> >The S2 bluebird elec dizzy has the 4 plug bosch module on the outside of
> >the dizzy.The mechanic should have seen that if its there.Bit of a waste
> >of time and money tuning the fuel maps then setting it up so you can run
> >the ignition maps.I'd be kicking the mechanics butt.
> >Andrew Smith
> >
> >Tim Albany wrote:
> >
> >> just a bit of a question
> >>
> >> I think i have standard electronic ignition in my 1600 z24/l20b motor
> >> (module in dizzy cap in place of points) and i am trying to find out
> >> what is the best module/dizzy set up to get a feed to computer(link
> >> management) to control the advance etc. The mechanic who was tuning
> >> the injection was saying that the four terminal bosch were ideal but
> >> can't fit under the dizzy cap, ant ideas?
> >>
> > > thanks Tim
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
