No issues known to me Terry, Cause they modify your control arms (cut and tig welded using 6mm plate and bolted with M8 High tensile bolts), any variance in length is already accounted for. Basically when they are cut and modified with no spacers you are left with an original length control arm. Shims (that are supplied) are then added to get the desired adjustment.
The Whiteline 'engineer approved' mods retail at $280+gst or if you get em through me $269 with gst included, with the shims for up to 3.5 deg neg camber. I can also get them done by a guy here in Melbourne for $199 with shims etc, to exactly the same standards but without the official engineers approval for $199. Cam CM510 www.sprite.com.au/cm510 ----- Original Message ----- From: Terry Rudd <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, February 22, 2002 2:46 PM Subject: RE: Whiteline suspension upgrade > Cam, > > These sound like worth a look. > > Any known issues? eg do they fit all of the xmembers out there? > Cost? > Anything else you can tell us. > > regards > TR > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of cm510 > Sent: Friday, 22 February 2002 2:36 PM > To: [EMAIL PROTECTED] > Subject: Re: Whiteline suspension upgrade > > > Guys, the adjustable rubber mounted lower control arms I get through > Whiteline are meant to be engineer aproved for road use. They give up to > 3.5 deg neg camber with a nice little increase in track width as well. > > Cam > CM510 > www.sprite.com.au/cm510 > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
