Stuarts and Randys (1600 workshop) like these.... www.sprite.com.au/cm510/images/d37.jpg they are on my car.
My personal preference is for the shim adjustable types for ease of use and adjustability.... www.sprite.com.au/cm510/images/real_handling_38(a).jpg Cam CM510 www.sprite.com.au/cm510 ----- Original Message ----- From: Leighton <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, February 23, 2002 6:14 PM Subject: Re: Whiteline suspension upgrade > what are stuarts?? > > > Leighton > ----- Original Message ----- > From: "Chris Howard" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Friday, February 22, 2002 4:36 PM > Subject: RE: Whiteline suspension upgrade > > > > Stewart Wilkins does them with a threaded bar instead of shims... Quite > > nice, $220 a pair exchange, includes new bushes. > > > > Mad Dat also has a similar one, although IMHO Stewart's look better and > > I think are cheaper. > > > > Cheers, > > > > Chris > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED]] On Behalf Of CM510 > > > Sent: Friday, 22 February 2002 2:41 PM > > > To: [EMAIL PROTECTED] > > > Subject: Re: Whiteline suspension upgrade > > > > > > > > > No issues known to me Terry, > > > > > > Cause they modify your control arms (cut and tig welded using > > > 6mm plate and > > > bolted with M8 High tensile bolts), any variance in length is already > > > accounted for. Basically when they are cut and modified with > > > no spacers you > > > are left with an original length control arm. Shims (that > > > are supplied) are > > > then added to get the desired adjustment. > > > > > > The Whiteline 'engineer approved' mods retail at $280+gst or > > > if you get em > > > through me $269 with gst included, with the shims for up to > > > 3.5 deg neg > > > camber. > > > > > > I can also get them done by a guy here in Melbourne for $199 > > > with shims etc, > > > to exactly the same standards but without the official > > > engineers approval > > > for $199. > > > > > > > > > Cam > > > CM510 > > > www.sprite.com.au/cm510 > > > ----- Original Message ----- > > > From: Terry Rudd <[EMAIL PROTECTED]> > > > To: <[EMAIL PROTECTED]> > > > Sent: Friday, February 22, 2002 2:46 PM > > > Subject: RE: Whiteline suspension upgrade > > > > > > > > > > Cam, > > > > > > > > These sound like worth a look. > > > > > > > > Any known issues? eg do they fit all of the xmembers out there? > > > > Cost? > > > > Anything else you can tell us. > > > > > > > > regards > > > > TR > > > > > > > > -----Original Message----- > > > > From: [EMAIL PROTECTED] > > > > [mailto:[EMAIL PROTECTED]]On Behalf Of cm510 > > > > Sent: Friday, 22 February 2002 2:36 PM > > > > To: [EMAIL PROTECTED] > > > > Subject: Re: Whiteline suspension upgrade > > > > > > > > > > > > Guys, the adjustable rubber mounted lower control arms I get through > > > > Whiteline are meant to be engineer aproved for road use. > > > They give up to > > > > 3.5 deg neg camber with a nice little increase in track > > > width as well. > > > > > > > > Cam > > > > CM510 > > > > www.sprite.com.au/cm510 > > > > > > > > > > > > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
