Have a look at the suspension stuff on this site. www.datsport.com/Handling_Kit_A.html ----- Original Message ----- From: "Greg" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, 17 November 2002 17:53 PM Subject: RE: Strut Details
> G'day Terry > > Have you heard of anyone using 240z struts and shocks on a 510 race car > or are they too short. > > I was planning on moving the lower control arms pivots up 20mm and using > some strut spacers. > > Cheers > Trevor Pooley > > > > On Tue, 2002-11-12 at 21:45, Terry Rudd wrote: > > Jason, > > > > No, Zed bolt spacing are all 3.5" i.e. Sumitomo callipers. > > > > BTW, Hilux are also Sumitomo, I was just checking who was awake (-: > > > > regards > > Terry > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED]]On Behalf Of Jason & Rachel > > Harris > > Sent: Tuesday, 12 November 2002 9:04 PM > > To: [EMAIL PROTECTED] > > Subject: RE: Strut Details > > > > > > Is the caliper bolt for 260z spacnig different again ? > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED]]On Behalf Of Terry Rudd > > Sent: Saturday, 9 November 2002 4:56 PM > > To: [EMAIL PROTECTED] > > Subject: RE: Strut Details > > > > > > Jason, > > > > 180B, 200B and 240K struts are shorter than late model 1600 struts and when > > used with 1600 springs of the same height the front suspension will sit > > around 1.5" lower. Each give a number of options for brake upgrades and as a > > bonus you get larger front wheel bearings with late 180B, 200B or 240K legs. > > 180B struts have calliper bolt spacing of 76.2mm (3") which suit Holder > > callipers, and the others use 88.9 (3.5") spacing eg Hilux, Sumitomo etc. > > > > regards > > Terry > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED]]On Behalf Of Jason & Rachel > > Harris > > Sent: Saturday, 9 November 2002 12:19 PM > > To: Ozdat (E-mail) > > Subject: Strut Details > > > > > > What is the main advantage in running 180b struts or 200b struts in a 1600 ? > > > > I have seen many difference setup looking at the Ozdat feature cars. > > > > I have picke dup a 180 for nix want to know is it worthwhile keeping the > > struts and other bits and peices. > > > > Also does anyone know if the Sumitomo calipers from ther 260z will fit > > either of the 180 or 200b struts. > > > > I do not have the struts yet otherwise I would have tried already. > > > > Cheer's > > > > > > > > > > > > > > > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
