Dave, It is a twin cam 16 valve that fits on an l series bottom end, made by nissan competition department initially for 1600 cc formula pacific engines (L14 bottom end with 66mm stroke and 87.8 mm bore)205 hp @ 10500rpm. The head was later adapted to the L20B as the FIA GROUP4 engine. Robert Thompson of Ballarat had one on a 510 2v litre sports sedan a few years back that was unbeatable. The purchaser has the engine in bits for the last few years I believe.?
Cheers, Feral Errol <http://www.datrats.com.au/> -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of David Costello Sent: Tuesday, December 10, 2002 5:56 PM To: [EMAIL PROTECTED] Subject: Re: unsubscribe what's an LZ14 head? Dave ----- Original Message ----- From: "E Smith" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, December 10, 2002 4:01 PM Subject: RE: unsubscribe > The going rate is about 6500 OZZIE pesos (450,000Y)with cams and manifolds > if you can find one. > I just found out there were two sunny's brought in for the southern cross > fitted with LZ14's the same year as the 710 violets. I havent found out how > they went yet. > Cheers, > Feral Errol > <http://www.datrats.com.au/> > > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of Ben C > Sent: Tuesday, December 10, 2002 12:26 PM > To: [EMAIL PROTECTED] > Subject: Re: unsubscribe > > > whats a genuine LZ14 head worth errol??? > > > ----- Original Message ----- > From: "E Smith" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Tuesday, December 10, 2002 7:53 AM > Subject: RE: unsubscribe > > > > I am currently doing up a late FIA head. It is costing a lot to do up but > it > > will be worth it. > > I had to sell the last FIA head I had due to extreme poverty. I will try > to > > not repeat that mistake. > > A cost breakdown is: - $100 testing for porosity, cracks and hardness. > $300 > > inc freight for hardening the head back to T6 specs. 214N stainless > billet > > valves tuftrided tuliped and swirl polished are $528. Valve spring pairs > > with matched rates $280 a set. New silchrome valve seats and new bronze > > guides with 5 cut angles on the seats and the radius blended into the > > chambers and face machining back cylinder face and manifold face $650. > Flow > > matching of inlet ports and flow matching exhaust ports to ensure 80% flow > > of inlets $600. 8 new rocker arms (lightened and polished) $240 + time to > > modify. > > Machining cam tower for flow modifications and to fit cam spray bar $100. > > Billet "Clive Cams" camshaft $210. > > Titanium valve spring retainers $240. > > > > Total costs for the head will be approx $3200, plus manifold gasket > > manufacture ($300) and fabricated extractors $600 - $1000?). This is on > top > > of the purchase price for the head in the first place. > > > > Any wonder you see the heads and inlet manifold only on Nissan Sport sites > > in the US for $3400 US. It costs money to do this stuff properly and you > get > > what you pay for! An FIA is a bit like owning a works 510 SSS safari car > vs > > the 510 deluxe granny car. Both are great in their own right, but one is a > > lot more fun and appreciates greatly in value. > > > > Other heads may be better (OS GIKEN or LZ16 valvers) but this head was > > available and they arent :-) A mint L18 OS GIKEN head went back to Japan a > > while back. It sold for Y 1,000,000 $14,450 AUD) with all manifolds, carbs > > and cams. > > > > Cheers, > > Feral Errol > > <http://www.datrats.com.au/> > > > > > > --------------------------------------------------------------------- > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
