OK, I get what you are talking about now. To fit the sumi's you need the 200B or 240 k hubs to be fitted to the stanza struts.
Cheers, Feral Errol <http://www.datrats.com.au/> -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Heath Sent: Wednesday, January 08, 2003 3:37 PM To: [EMAIL PROTECTED] Subject: Re: 1200 questions i couldn't use the sumi's on my 1981 stanza struts with the stanza rotor the offset was way out, it was a few years ago when i was doing it all? i know the early models had a different caliper . i had a look a DBA Aussie early up to 6/79 had 253mm rotor height of 48mm aussie late 6/79-83 had 244mm rotor height of 43.6mm they 2 other stanza's to choose from as well they where imports both early, 1 was 245mm rotor height 35.5mm (min thickness of 8.4mm) import SSS model 232mm rotor height of 35mm (min thickness of 8.5mm) Heath ----- Original Message ----- From: E Smith <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, January 08, 2003 5:54 AM Subject: RE: 1200 questions > Heath, > What spacing was different on the late stanza struts? > > Cheers, > Feral Errol > <http://www.datrats.com.au/> > > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of Heath > Sent: Tuesday, January 07, 2003 10:14 PM > To: [EMAIL PROTECTED] > Subject: Re: 1200 questions > > > Hi guys, > > i running 240k struts in my 1200 coupe i, i couldn't use them on a stanza > strut, the bolt spacing is different (1981 stanza), i'm using 270mm rotors, > i bought them new about a month ago. u guys must be using early model stanza > struts. > the spring dia on a 240k are to large, mine have been converted to coil > over. > to eliminate that problem. > > Heath > ----- Original Message ----- > From: Andrew Denniss <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Friday, January 03, 2003 6:33 PM > Subject: Re: 1200 questions > > > > Mark when I first had the stanza struts with My A14 Iran 200b discs with > the twin spots on it was a great cheap package worked very well with a good > set of pads would pull up teh > > light 1200 easy with descnt power. > > Cheers Andrew > > > > Mark Firman wrote: > > > > > Thanks kris and andrew, that helps a lot! > > > If he was to use stanza struts, do 240K discs and twin spot sumitomo's > bolt on or is their some welding/machining required?? > > > Also, if 240K brakes do bolt up are they about the best braking option > to go for?? (staying on the cheap) Or do R31 or another better kind of > brakes bolt up to stanza struts?? > > > Thanks again, > > > Mark Firman > > > > > > --- "Kristian Walsham" <[EMAIL PROTECTED]> wrote: > > > >I wouldn`t think so as the spring diameter is too wide, you would have > to > > > >cut the spring platform off and weld on a 1200/Stanza one. > > > > If your wanting to do it only for the brakes, > then > > > >stay with the Stanza struts and remove the Stanza disc from the hub and > > > >simply bolt on the 240K disc to the Stanza hub and the fit the Twin > Spot > > > >Sumitomo`s. > > > > > > > >The ute diff`s are pretty strong when welded up. I had one in my old > 1200 > > > >race car that came from 120y rally car (GROT) that had a 240hp L20 > stroker > > > >that was also used in Motorkana`s. > > > > > > > >Kris. > > > >----- Original Message ----- > > > >From: "Mark Firman" <[EMAIL PROTECTED]> > > > >To: <[EMAIL PROTECTED]> > > > >Sent: Friday, January 03, 2003 8:48 AM > > > >Subject: 1200 questions > > > > > > > > > > > >> Hi everyone, > > > >> > > > >> Just enquiring for a friend of mine who needs to know if 240K > > > >struts/brakes are an easy fit onto the front of a 1200 sedan? Has > anyone > > > >done this before? He would go for the 200B or stanza ones but he can > get > > > >some 240K ones cheap so we thought it was worth asking.... > > > >> > > > >> Also, can anyone recommend an easy cheap diff upgrade that could > handle > > > >CA18DET power?? He read a locked 1200 ute diff will hold up... can > anyone > > > >back that up? > > > >> > > > >> CHeers, > > > >> Mark Firman > > > >> > > > >> _____________________________________________________________ > > > >> Get Your free Ozdat Email Account > > > >> ---> http://www.ozdat.com > > > >> > > > >> _____________________________________________________________ > > > >> Select your own custom email address for FREE! Get [EMAIL PROTECTED] > w/No > > > >Ads, 6MB, POP & more! http://www.everyone.net/selectmail?campaign=tag > > > >> > > > >> > > > > > > > > > > > > > > _____________________________________________________________ > > > Get Your free Ozdat Email Account > > > ---> http://www.ozdat.com > > > > > > _____________________________________________________________ > > > Select your own custom email address for FREE! Get [EMAIL PROTECTED] > w/No Ads, 6MB, POP & more! http://www.everyone.net/selectmail?campaign=tag > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
