Did you use that sticky gooey loctite rubbish? I'm thinking a good fat bead of silicone, leave the bolts loosw & let it sit till it's nearly dry and then do it up slowly so you've got a big chunky bead on it.
Or you could go buy the L18 one like someone suggested. :D I love my silicone gun... Mwaahahahah. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Andrew Greenbury Sent: Thursday, 29 January 2004 5:13 PM To: [EMAIL PROTECTED] Subject: RE: EFI L series manifold gasket Hi Geordie, Ive tried gasket sealant but it didn't work :( Andrew > Bodgy I know, but would silicone fix it? > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Andrew > Greenbury > Sent: Thursday, 29 January 2004 2:47 PM > To: [EMAIL PROTECTED] > Subject: EFI L series manifold gasket > > > Hi everyone, > > Im having trouble getting my recently installed L18 efi manifold to seal > - I used an L20 mani gasket with the top port section cut out for the > injectors. This appears to not leave much material to seal, and it > seems to be leaking a bit around the top port section. > > What gasket has other people used on efi L4s, or should I make a > custom gasket for the application? > > Thanks for any help, > Andrew > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ ---------------------------------------------------------------------
