Just go to any Nissan dealer and ask for part number 14035-N6900.
Malcolm P.S make sure you use the steel brace that goes from end of the EFI inlet to engine mount ,,Thus the inlet will not wobble and come loose,, (just thought I should add that,Most people forget about it ) ----- Original Message ----- From: "Andrew Greenbury" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, January 29, 2004 7:14 PM Subject: Re: EFI L series manifold gasket > Hi Malcolm, > > I don't believe we got the S110 in Aust, or at least with a different > engine, so having trouble getting the correct gasket :( > > Andrew > > > Use the right gasket. > > L18E from a S110 180SX is what to ask for/. > > > > Malcolm > > ----- Original Message ----- > > From: "Andrew Greenbury" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Thursday, January 29, 2004 4:46 PM > > Subject: EFI L series manifold gasket > > > > > > > Hi everyone, > > > > > > Im having trouble getting my recently installed L18 efi manifold to seal > > > - I used an L20 mani gasket with the top port section cut out for the > > > injectors. This appears to not leave much material to seal, and it > > > seems to be leaking a bit around the top port section. > > > > > > What gasket has other people used on efi L4s, or should I make a > > > custom gasket for the application? > > > > > > Thanks for any help, > > > Andrew > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ ---------------------------------------------------------------------
