I looked at mine again this morning. The spring mount tab on the body is
gone, anyone have suggestions? Think a new hook/tab could be welded in
there? IIRC the a pillar down channel is where its mounting on, meaning
I would have to drill through the square to mount a u hook or somethign.
Suggestions?
-Rolf
andrew strasfogel wrote:
My trusted mechnic told me to take it to a body shop as there is no way to
access the lower bolts without R/R of the fender. If the fender is
original, it has been glued into place, so this is NOT a job for the
unprepared or hubristic.
I am basically a coward so will not arrempt to do this on my own.
On Mon, Jun 22, 2009 at 11:16 PM, Jim Cathey <j...@windwireless.net> wrote:
Mine is buggered at the locking pin, not the lower connector.
Mine, too.
-- Jim
_______________________________________
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://okiebenz.com/pipermail/mercedes_okiebenz.com/attachments/20090623/3388abd6/attachment.html>
_______________________________________
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
_______________________________________
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
