Is the transaction based on actual value of bartered goods or on money exchanged ($0)?
Sent from my iPhone > On Feb 26, 2021, at 3:20 PM, Andrew Strasfogel <astrasfo...@gmail.com> wrote: > > > 10 percent of this transaction goes to the House. > >> On Fri, Feb 26, 2021 at 3:18 PM Dimitri Seretakis via Mercedes >> <mercedes@okiebenz.com> wrote: >> Thanks. Sounds like a good approach! >> >> Sent from my iPhone >> >> > On Feb 26, 2021, at 12:38 PM, G Mann via Mercedes <mercedes@okiebenz.com> >> > wrote: >> > >> > I have some experience with that kind of project... The outtake was I >> > discovered there are a number of different length wheel bolts for Mercedes >> > / wheels. >> > The good news is: I found them in good supply on Ebay, rather cheap. >> > Tip: Tak e the stock wheel and with it off the car, insert a lug bolt, >> > then, from the back side of the wheel, take a good measurement of the >> > extending grip length of the protruding threads. >> > That measurement is how much thread length the car needs to safely mount a >> > wheel. >> > >> > Now, take the "new wheel" and do the same measurement... with the stud you >> > now have. Do a little math to determine how much longer or shorter wheel >> > stud you need to safely mount the "new" wheel, and go looking on ebay, or >> > amazon, or wherever you find the length you need. >> > >> > Remember, Mercedes uses a Ball shape to the contact between wheel and >> > stud.. NOT a cone shape.. ONLY use the ball shape studs. >> > Get the correct wheel studs for the wheels you want to use and "Bobs yer >> > Unkle" ... Happy motoring. >> > >> > As I recall, a set of studs cost me about $12 per wheel, with express >> > shipping. >> > >> > >> >> On Fri, Feb 26, 2021 at 10:01 AM Dimitri Seretakis via Mercedes < >> >> mercedes@okiebenz.com> wrote: >> >> >> >> The 90 300D 2.5 has three 8 hole aftermarket wheels but retains the >> >> original 15 hole wheel in the right rear position. I have extra 8 hole >> >> wheels and tried to swap the 15 for the 8 but the car made a grinding >> >> noise. Turns out that the lug bolts interfere with the parking brake drum >> >> somehow. Has anyone encountered this problem before? Should/ can I safely >> >> use shorter lugs on this wheel only? I’m just trying to get a uniform look >> >> here. Ideally I’d like to find an original clean set of 15 hole wheels as >> >> I >> >> like them better but for now I just want uniformity. >> >> >> >> Sent from my iPhone >> >> >> >> _______________________________________ >> >> http://www.okiebenz.com >> >> >> >> To search list archives http://www.okiebenz.com/archive/ >> >> >> >> To Unsubscribe or change delivery options go to: >> >> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >> >> >> >> >> > _______________________________________ >> > http://www.okiebenz.com >> > >> > To search list archives http://www.okiebenz.com/archive/ >> > >> > To Unsubscribe or change delivery options go to: >> > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >> > >> >> >> _______________________________________ >> http://www.okiebenz.com >> >> To search list archives http://www.okiebenz.com/archive/ >> >> To Unsubscribe or change delivery options go to: >> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >> _______________________________________ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com