Dimitri.
I have a few 124 wheels that you may have.
Most are typical used rims, all are useful.
Fred.

On Fri, Feb 26, 2021 at 3:25 PM Dimitri Seretakis via Mercedes <
mercedes@okiebenz.com> wrote:

> Is the transaction based on actual value of bartered goods or on money
> exchanged ($0)?
>
> Sent from my iPhone
>
> > On Feb 26, 2021, at 3:20 PM, Andrew Strasfogel <astrasfo...@gmail.com>
> wrote:
> >
> > 
> > 10 percent of this transaction goes to the House.
> >
> >> On Fri, Feb 26, 2021 at 3:18 PM Dimitri Seretakis via Mercedes <
> mercedes@okiebenz.com> wrote:
> >> Thanks. Sounds like a good approach!
> >>
> >> Sent from my iPhone
> >>
> >> > On Feb 26, 2021, at 12:38 PM, G Mann via Mercedes <
> mercedes@okiebenz.com> wrote:
> >> >
> >> > I have some experience with that kind of project... The outtake was I
> >> > discovered there are a number of different length wheel bolts for
> Mercedes
> >> > / wheels.
> >> > The good news is: I found them in good supply on Ebay, rather cheap.
> >> > Tip:  Tak e the stock wheel and with it off the car, insert a lug
> bolt,
> >> > then, from the back side of the wheel, take a good measurement of the
> >> > extending grip length of the protruding threads.
> >> > That measurement is how much thread length the car needs to safely
> mount a
> >> > wheel.
> >> >
> >> > Now, take the "new wheel" and do the same measurement... with the
> stud you
> >> > now have.   Do a little math to determine how much longer or shorter
> wheel
> >> > stud you need to safely mount the "new" wheel, and go looking on
> ebay, or
> >> > amazon, or wherever you find the length you need.
> >> >
> >> > Remember, Mercedes uses a Ball shape to the contact between wheel and
> >> > stud.. NOT a cone shape.. ONLY use the ball shape studs.
> >> > Get the correct wheel studs for the wheels you want to use and "Bobs
> yer
> >> > Unkle" ... Happy motoring.
> >> >
> >> > As I recall, a set of studs cost me about $12 per wheel, with express
> >> > shipping.
> >> >
> >> >
> >> >> On Fri, Feb 26, 2021 at 10:01 AM Dimitri Seretakis via Mercedes <
> >> >> mercedes@okiebenz.com> wrote:
> >> >>
> >> >> The 90 300D 2.5 has three 8 hole aftermarket wheels but retains the
> >> >> original 15 hole wheel in the right rear position. I have extra 8
> hole
> >> >> wheels and tried to swap the 15 for the 8 but the car made a grinding
> >> >> noise. Turns out that the lug bolts interfere with the parking brake
> drum
> >> >> somehow. Has anyone encountered this problem before? Should/ can I
> safely
> >> >> use shorter lugs on this wheel only? I’m just trying to get a
> uniform look
> >> >> here. Ideally I’d like to find an original clean set of 15 hole
> wheels as I
> >> >> like them better but for now I just want uniformity.
> >> >>
> >> >> Sent from my iPhone
> >> >>
> >> >> _______________________________________
> >> >> http://www.okiebenz.com
> >> >>
> >> >> To search list archives http://www.okiebenz.com/archive/
> >> >>
> >> >> To Unsubscribe or change delivery options go to:
> >> >> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >> >>
> >> >>
> >> > _______________________________________
> >> > http://www.okiebenz.com
> >> >
> >> > To search list archives http://www.okiebenz.com/archive/
> >> >
> >> > To Unsubscribe or change delivery options go to:
> >> > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >> >
> >>
> >>
> >> _______________________________________
> >> http://www.okiebenz.com
> >>
> >> To search list archives http://www.okiebenz.com/archive/
> >>
> >> To Unsubscribe or change delivery options go to:
> >> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >>
> _______________________________________
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>

-- 
Fred Moir
Lynn MA
Diesel preferred
_______________________________________
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Reply via email to