I believe it is grounded to the panel as there is an electric hot water tank and I know there is a ground clamp on the pipe at the tank and a wire running back to panel from that ground clamp.
Randy -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Timothy Robinson Sent: Wednesday, December 19, 2007 12:21 PM To: Mercedes Discussion List Subject: Re: [MBZ] Another Generator Question Make sure to bond the copper water lines to the ground at the main panel. > From: "R A Bennell" <[EMAIL PROTECTED]> > Reply-To: Mercedes Discussion List <mercedes@okiebenz.com> > Date: Wed, 19 Dec 2007 10:45:53 -0600 > To: "Mercedes Discussion List" <mercedes@okiebenz.com> > Subject: Re: [MBZ] Another Generator Question > > No metal pipe at all between the intake in the lake and the house up at the > top. All of it is plastic hose. Even > most of the cold water line under the house is plastic hose. Only the hot > water line and the pipes going up through > the floor are copper at this time. I am renovating and all of the under floor > stuff will be copper in the next > summer or two. Will stay with the plastic hose going down the hill to the pump > house and lake. > > Randy > _______________________________________ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
