On Wed, 24 May 2000, Fred Wright wrote:

> 
> On Tue, 23 May 2000, Jeffrey E. Harris wrote:
> 
> > I am trying to connect my Amiga via null-modem cable to a Windows 2000
> > Advanced Server, which I have built, using Miami 3.2.  I have also tried
> > testing it with a Windows NT 4.0 Workstation.  To date, I have had no luck
> > at all in having my Amiga successfully connect using PPP and the null
> > modem cable while the NT machines are configured for dial-in access. 
> 
> > If I look at the modem log on the NT machines, I see that data is being
> > received; however, there are "unrecognized responses" messages after
> > receipt of the data.  What is the standard data that a PPP client sends to
> > a server to start LCP authentication that I should look for?
> 
> First there are LCP negotiations, which establish, among other things, the
> type of authentication desired by the server.  After LCP negotiations
> complete, the client then sends any required (and supported)
> authentication.
> 
> If the server requires MS-CHAP (common on NT systems), you'll need to
> enable it, and you'll need to have MiamiSSL properly installed, and Miami
> registered.  I don't know whether you can turn oif
>

Windows 2000 supports PAP, SPAP, CHAP, MS-CHAP, MS-CHAP V2, and MS-CHAP V2
for Windows 95!  I've tried turning them on and off with no luck, both on 
the Amiga side (well, the MS-CHAP anyway), and the Windows NT/2000 side. 
 
I never get to the authentication part.

I have a registered copy of Miami, and SSL 2.11.

> > In almost all cases, LCP starts, and then I receive the standard error
> > message back saying that either I have an invalid configuration, or there
> > is a problem with the server.  MiamiInit returns the same error message.
> 
> You can use the PPP log to see what's happening if needed, but before
> doing that I suggest downloading MiamiDx and reading the section of the
> guide on this exact topic.  You don't need to install MiamiDx just to read
> the guide, though you might decide you like it anyway. :-)
> 

I will check out the guide, but the PPP log on the Amiga side just shows a
bunch of requests sent, and that is all.

Thanks for the suggestions.

>                                       Fred Wright
> 
> -- 
> 
> To unsubscribe send "unsubscribe miami-talk-ml" to
> "[EMAIL PROTECTED]". For help on list commands send "help" to
> "[EMAIL PROTECTED]".
> 
> 
> 
> 
> 

-- 

To unsubscribe send "unsubscribe miami-talk-ml" to
"[EMAIL PROTECTED]". For help on list commands send "help" to
"[EMAIL PROTECTED]".


Reply via email to