Huh?? No way the ecu driver is strong enough to run the fan motor. Eric, have you set the temp?
Bill Cardell TurboDog's Dad www.flyinmiata.com www.fmwestfield.com Sales 1-800-359-6957 Tech 970-464-5600 Before you call, check out http://www.flyinmiata.com/FAQ/ ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of Robert McElwee Sent: Tuesday, July 14, 2009 3:18 PM To: Eric McCord Cc: Miata Power List Subject: Re: Link ECU fan control Ditch the relay and see if it works... On Mon, Jul 13, 2009 at 9:43 PM, Eric McCord <[email protected]> wrote: I am trying to get the ECU fan control setup. I connected a relay to 1L per the instructions but I still don't get the fans to run when it gets hot. I can get the fans to come on by grounding the relay but the ECU is not taking it to ground. I know I must be doing something wrong...........just can figure it out. Eric _______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower -- Robert McElwee and Blue Flash "The 50 MPG Miata" www.lightweightmiata.com/blue Lightweight Miata Forum: www.lightweightmiata.com/forum The Miata Trailer Project: www.lightweightmiata.com/trailer
_______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
