So that is not where I want to get power for the relay............I am heading out right now to KILL that connection. Don't want a dead battery. Funny how that just lit those LED's dim though.
Eric On Tue, Jul 14, 2009 at 11:59 PM, Bill Cardell <[email protected]> wrote: > aux fan fuse is hot off battery, so with the switch off you're feeding > 12volts back into the ecu through the fan driver. > > Bill Cardell > TurboDog's Dad > Flyin' Miata > 1-800-359-6967 (sales) > 970-464-5600 (tech support) > www.flyinmiata.com > www.fmwestfield.com > > > ------------------------------ > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Eric McCord > *Sent:* Tuesday, July 14, 2009 9:24 PM > *To:* Ray Ayala > *Cc:* Miata Power List > *Subject:* Re: Link ECU fan control > > I thought it was a Mk2 but I could be wrong. I'll check again tomorrow. > Here is the ODD thing. I now have a switch added to take the relay to ground > and when I turn off the ignition if the switch is OPEN my keypad has the > Adjust, Edit and Select lit dim and nothing else. As soon as I switch the > line to ground they go out. This is with the key OFF. I just noticed it > tonight when I got home in the dark. > > The relay has it's power coming from the aux fan fuse under the hood that > should not be getting power with the key off. It is very odd that only the > LED's for the names are getting lit but nothing else. > > Eric > > On Tue, Jul 14, 2009 at 7:28 PM, Ray Ayala <[email protected]> wrote: > >> Is it a Mk-I by any chance? >> >> ----- Original Message ----- From: "Eric McCord" <[email protected] >> > >> To: "Ray Ayala" <[email protected]> >> Sent: Tuesday, July 14, 2009 7:02 AM >> Subject: Re: Link ECU fan control >> >> >> It's a 1.6 >>> >>> On Tue, Jul 14, 2009 at 9:25 AM, Ray Ayala <[email protected]> wrote: >>> >>> Which Link ECU ? >>>> >>>> ----- Original Message ----- >>>> *From:* Eric McCord <[email protected]> >>>> *To:* Miata Power List <[email protected]> >>>> *Sent:* Monday, July 13, 2009 6:43 PM >>>> *Subject:* Link ECU fan control >>>> >>>> I am trying to get the ECU fan control setup. I connected a relay to 1L >>>> per >>>> the instructions but I still don't get the fans to run when it gets hot. >>>> I >>>> can get the fans to come on by grounding the relay but the ECU is not >>>> taking >>>> it to ground. I know I must be doing something wrong...........just can >>>> figure it out. >>>> >>>> Eric >>>> >>>> ------------------------------ >>>> _______________________________________________ >>>> Miatapower mailing list >>>> [email protected] >>>> http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower >>>> >>>> >>>> >>> >> >
_______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
