Too much conspiracy for the kernel!

On Fri, May 13, 2011 at 02:49:40PM -0500, Chris Bennett wrote:
> one page  is www.financialarmageddon.com/
> There are some others which I can report after I finally get some bad ones 
> closed out so that xxxterm will stay running.
> This page fails for both FF4 and xxxterm, not in Konqueror.
> 
> dmesg
> 
> OpenBSD 4.9-current (GENERIC) #69: Tue May  3 14:59:18 MDT 2011
>     t...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel Pentium III ("GenuineIntel" 686-class) 449 MHz
> cpu0: 
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PSE36,MMX,FXSR,SSE
> real mem  = 267821056 (255MB)
> avail mem = 253292544 (241MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 05/28/02, BIOS32 rev. 0 @ 0xffe90, 
> SMBIOS rev. 2.3 @ 0xf6d60 (
> 58 entries)
> bios0: vendor Dell Computer Corporation version "A17" date 05/28/2002
> bios0: Dell Computer Corporation Inspiron 3700 x450GT
> apm0 at bios0: Power Management spec V1.2
> apm0: battery life expectancy 95%
> apm0: AC off, battery charge high, estimated 4:15 hours
> acpi at bios0 function 0x0 not configured
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfbd20/128 (6 entries)
> pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371 ISA and IDE" rev 
> 0x00)
> pcibios0: PCI bus #3 is the last bus
> bios0: ROM list: 0xc0000/0x10000
> cpu0 at mainbus0: (uniprocessor)
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
> intelagp0 at pchb0
> agp0 at intelagp0: aperture at 0xf4000000, size 0x4000000
> ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "ATI Mobility 1" rev 0x64
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> cbb0 at pci0 dev 3 function 0 "TI PCI1225 CardBus" rev 0x01: irq 11
> cbb1 at pci0 dev 3 function 1 "TI PCI1225 CardBus" rev 0x01: irq 11
> piixpcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
> pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 
> wired to compatibility
> , channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <IC25T048ATDA05-0>
> wd0 at pciide0 channel 0 drive 0: <IC25T048ATDA05-0>
> wd0: 16-sector PIO, LBA, 45780MB, 93759120 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, RW/DVD GCC-4240N, D110> ATAPI 
> 5/cdrom removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
> piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x02: SMI
> iic0 at piixpm0
> spdmem0 at iic0 addr 0x50: 128MB SDRAM non-parity PC100CL2
> maestro0 at pci0 dev 8 function 0 "ESS Maestro 2E" rev 0x10: irq 5
> ac97: codec id 0x83847609 (SigmaTel STAC9721/23)
> ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
> audio0 at maestro0
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0x20
> pcmcia0 at cardslot0
> cardslot1 at cbb1 slot 1 flags 0
> cardbus1 at cardslot1: bus 3 device 0 cacheline 0x8, lattimer 0x20
> pcmcia1 at cardslot1
> isa0 at piixpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> mtrr: Pentium Pro MTRR support
> xl0 at cardbus1 dev 0 function 0 "3Com 3CCFE575CT" rev 0x10: irq 11, address 
> 00:01:02:79:15:bf
> tqphy0 at xl0 phy 0: 78Q2120 10/100 PHY, rev. 11
> uhub1 at uhub0 port 1 "Genesys Logic USB2.0 Hub" rev 2.00/7.02 addr 2
> uhub2 at uhub1 port 4 "Genesys Logic USB2.0 Hub" rev 2.00/7.02 addr 3
> uhidev0 at uhub2 port 1 configuration 1 interface 0 "Logitech USB Receiver" 
> rev 1.10/46.00 addr 4
> uhidev0: iclass 3/1
> ums0 at uhidev0: 8 buttons, Z dir
> wsmouse1 at ums0 mux 0
> uhidev1 at uhub2 port 1 configuration 1 interface 1 "Logitech USB Receiver" 
> rev 1.10/46.00 addr 4
> uhidev1: iclass 3/0, 16 report ids
> uhid0 at uhidev1 reportid 16: input=6, output=6, feature=0
> vscsi0 at root
> scsibus1 at vscsi0: 256 targets
> softraid0 at root
> root on wd0a (1effc3e46946b8f4.a) swap on wd0b dump on wd0b
> uath0 at uhub2 port 4 "Atheros Communications Inc WG111T" rev 2.00/0.01 addr 5
> uath0 detached
> uath0 at uhub2 port 4 "Atheros Communications Inc WG111T" rev 2.00/0.01 addr 5
> uath0: MAC/BBP AR5523, RF AR2112, address 00:14:6c:e6:0d:5b
> 
> Chris Bennett

Reply via email to