Yes I have a sound card on the MB but seems not to be discovered.
Sound out from VLC and mplayer, which do not show any error about sound,
however I tried any jack of the MB and Sound Blaster card but no sound at
all ?
Full dmesg :
$ dmesg
OpenBSD 4.4 (GENERIC) #1021: Tue Aug 12 17:16:55 MDT 2008
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Sempron(tm) Processor LE-1200 ("AuthenticAMD" 686-class, 512KB L2
cache) 2.01 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,MMX,FXSR,SSE,SSE2,SSE3,CX16
real mem = 1039429632 (991MB)
avail mem = 996581376 (950MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/11/08, BIOS32 rev. 0 @ 0xf0010,
SMBIOS rev. 2.5 @ 0xfc520 (22 entries)
bios0: vendor American Megatrends Inc. version "P1.00" date 09/11/2008
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 0%
apm0: AC off, battery charge unknown, estimated 0:00 hours
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 3.0 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf44b0/400 (23 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x10de product 0x0548
pcibios0: PCI bus #8 is the last bus
bios0: ROM list: 0xc0000/0xea00
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
"NVIDIA MCP67 Memory" rev 0xa2 at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA MCP67 Host" rev 0xa2
nviic0 at pci0 dev 1 function 1 "NVIDIA MCP67 SMBus" rev 0xa2
iic0 at nviic0
spdmem0 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5
iic1 at nviic0
vendor "NVIDIA", unknown product 0x0543 (class processor subclass
Co-processor, rev 0xa2) at pci0 dev 1 function 3 not configured
ohci0 at pci0 dev 2 function 0 "NVIDIA MCP67 USB" rev 0xa2: irq 11, version
1.0, legacy support
ehci0 at pci0 dev 2 function 1 "NVIDIA MCP67 USB" rev 0xa2: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 4 function 0 "NVIDIA MCP67 USB" rev 0xa2: irq 10, version
1.0, legacy support
ehci1 at pci0 dev 4 function 1 "NVIDIA MCP67 USB" rev 0xa2: irq 10
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1
pciide0 at pci0 dev 6 function 0 "NVIDIA MCP67 IDE" rev 0xa1: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 ignored (disabled)
ppb0 at pci0 dev 8 function 0 "NVIDIA MCP67 PCI" rev 0xa2
pci1 at ppb0 bus 1
re0 at pci1 dev 8 function 0 "D-Link Systems DGE-528T" rev 0x10:
RTL8169/8110SB (0x1000), irq 10, address 00:22:b0:bd:32:61
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 3
emu0 at pci1 dev 10 function 0 "Creative Labs SoundBlaster Audigy 2" rev
0x00: irq 10
ac97: codec id 0x83847650 (SigmaTel STAC9750/51)
ac97: codec features headphone, 20 bit DAC, 20 bit ADC, SigmaTel 3D
audio0 at emu0
pciide1 at pci0 dev 9 function 0 "NVIDIA MCP67 SATA" rev 0xa2: DMA
pciide1: using irq 15 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <Veritech SSD 2009-01>
wd0: 1-sector PIO, LBA48, 30800MB, 63078400 sectors
wd1 at pciide1 channel 0 drive 1: <SAMSUNG HD103UJ>
wd1: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 5
wd2 at pciide1 channel 1 drive 1: <MAXTOR STM3160215AS>
wd2: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd2(pciide1:1:1): using PIO mode 4, Ultra-DMA mode 5
nfe0 at pci0 dev 10 function 0 "NVIDIA MCP67 LAN" rev 0xa2: irq 10, address
00:19:66:97:0d:31
rgephy1 at nfe0 phy 3: RTL8169S/8110S PHY, rev. 2
ppb1 at pci0 dev 11 function 0 vendor "NVIDIA", unknown product 0x0562 rev
0xa2
pci2 at ppb1 bus 2
ppb2 at pci0 dev 12 function 0 "NVIDIA MCP67 PCIE" rev 0xa2
pci3 at ppb2 bus 3
ppb3 at pci0 dev 13 function 0 "NVIDIA MCP67 PCIE" rev 0xa2
pci4 at ppb3 bus 4
ppb4 at pci0 dev 14 function 0 "NVIDIA MCP67 PCIE" rev 0xa2
pci5 at ppb4 bus 5
ppb5 at pci0 dev 15 function 0 "NVIDIA MCP67 PCIE" rev 0xa2
pci6 at ppb5 bus 6
ppb6 at pci0 dev 16 function 0 "NVIDIA MCP67 PCIE" rev 0xa2
pci7 at ppb6 bus 7
ppb7 at pci0 dev 17 function 0 "NVIDIA MCP67 PCIE" rev 0xa2
pci8 at ppb7 bus 8
vga1 at pci0 dev 18 function 0 vendor "NVIDIA", unknown product 0x053b rev
0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
drm at vga1 unsupported
pchb0 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00: core rev
DH-G1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627EHF rev 0x63
lm1 at wbsio0 port 0x290/8: W83627EHF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
biomask ff65 netmask ff65 ttymask ffff
mtrr: Pentium Pro MTRR support
uhidev0 at uhub2 port 3 configuration 1 interface 0 "Tsunami SM-2000" rev
1.00/1.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
2009/7/29 Chris Bennett <ch...@bennettconstruction.biz>
> What are you trying to get sound from?
> Try turning off the mutes that are on.
>
> mixerctl inputs.cd.mute=off for example.
>
> also, try cdio cdplay , with a music cd (This is pure digital and
> gives better quality than cdio play)
>
> also, add to .profile:
> pgrep -x aucat || aucat -l (someone please correct this for me if it
> has changed more recently)
>
> If this isn't enough, please post a full dmesg, if you have another sound
> system that is integrated into motherboard, you can also have problems
>
>
>
> inputs.cd.mute=onJean-Frangois SIMON wrote:
>
> Hi,
>>
>> I am runing VLC under fvwm but could not have any sound.
>>
>> Are things working by default or there might be something to tune in
>> general, or in my case ?
>>
>> Thanks for help.
>>
>> dmesg | grep audio
>> audio0 at emu0
>>
>> $ audioctl
>> name=SB Live!
>> version=0x00
>> config=emuxki
>>
>>
encodings=ulinear:8,mulaw:8*,alaw:8*,slinear:8*,slinear_le:16,ulinear_le:16*,
slinear_be:16*,ulinear_be:16*
>> properties=full_duplex,mmap,independent
>> full_duplex=0
>> fullduplex=0
>> blocksize=8192
>> hiwat=8
>> lowat=1
>> output_muted=0
>> monitor_gain=0
>> mode=
>> play.rate=48000
>> play.channels=2
>> play.precision=16
>> play.encoding=slinear_le
>> play.gain=255
>> play.balance=32
>> play.port=0x0
>> play.avail_ports=0x0
>> play.seek=0
>> play.samples=0
>> play.eof=0
>> play.pause=0
>> play.error=0
>> play.waiting=0
>> play.open=0
>> play.active=0
>> play.buffer_size=65536
>> play.block_size=8192
>> play.errors=0
>> record.rate=48000
>> record.channels=2
>> record.precision=16
>> record.encoding=slinear_le
>> record.gain=255
>> record.balance=32
>> record.port=0x1
>> record.avail_ports=0x7
>> record.seek=0
>> record.samples=0
>> record.eof=0
>> record.pause=0
>> record.error=0
>> record.waiting=0
>> record.open=0
>> record.active=0
>> record.buffer_size=65536
>> record.block_size=8192
>> record.errors=0
>>
>> $
>> mixerctl
>>
>> outputs.master=255,255
>> outputs.master.mute=off
>> outputs.mono=255
>> outputs.mono.mute=off
>> outputs.mono.source=mixerout
>> outputs.headphones=255,255
>> outputs.headphones.mute=on
>> inputs.speaker=255
>> inputs.speaker.mute=off
>> inputs.phone=191
>> inputs.phone.mute=on
>> inputs.mic=255
>> inputs.mic.mute=on
>> inputs.mic.preamp=off
>> inputs.mic.source=mic0
>> inputs.line=255,255
>> inputs.line.mute=on
>> inputs.cd=255,255
>> inputs.cd.mute=on
>> inputs.video=191,191
>> inputs.video.mute=on
>> inputs.aux=255,255
>> inputs.aux.mute=on
>> inputs.dac=255,255
>> inputs.dac.mute=off
>> record.source=mic
>> record.volume=255,255
>> record.volume.mute=off
>> outputs.spatial=off
>> outputs.spatial.center=0
>> outputs.spatial.depth=0
>> outputs.extamp=off
