On Wed, Jul 29, 2009 at 07:13:06AM +0200, Jean-Fran?ois SIMON wrote: > Yes I have a sound card on the MB but seems not to be discovered. > Sound out from VLC and mplayer, which do not show any error about sound, > however I tried any jack of the MB and Sound Blaster card but no sound at > all ?
for the onboard audio, check BIOS settings and/or remove the SB card. the onboard device is more likely to be better supported then the SB card anyway. > Full dmesg : > > $ dmesg > OpenBSD 4.4 (GENERIC) #1021: Tue Aug 12 17:16:55 MDT 2008 > dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC > cpu0: AMD Sempron(tm) Processor LE-1200 ("AuthenticAMD" 686-class, 512KB L2 > cache) 2.01 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS > H,MMX,FXSR,SSE,SSE2,SSE3,CX16 > real mem = 1039429632 (991MB) > avail mem = 996581376 (950MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 09/11/08, BIOS32 rev. 0 @ 0xf0010, > SMBIOS rev. 2.5 @ 0xfc520 (22 entries) > bios0: vendor American Megatrends Inc. version "P1.00" date 09/11/2008 > apm0 at bios0: Power Management spec V1.2 > apm0: battery life expectancy 0% > apm0: AC off, battery charge unknown, estimated 0:00 hours > acpi at bios0 function 0x0 not configured > pcibios0 at bios0: rev 3.0 @ 0xf0000/0x10000 > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf44b0/400 (23 entries) > pcibios0: no compatible PCI ICU found: ICU vendor 0x10de product 0x0548 > pcibios0: PCI bus #8 is the last bus > bios0: ROM list: 0xc0000/0xea00 > cpu0 at mainbus0 > pci0 at mainbus0 bus 0: configuration mode 1 (no bios) > "NVIDIA MCP67 Memory" rev 0xa2 at pci0 dev 0 function 0 not configured > pcib0 at pci0 dev 1 function 0 "NVIDIA MCP67 Host" rev 0xa2 > nviic0 at pci0 dev 1 function 1 "NVIDIA MCP67 SMBus" rev 0xa2 > iic0 at nviic0 > spdmem0 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5 > iic1 at nviic0 > vendor "NVIDIA", unknown product 0x0543 (class processor subclass > Co-processor, rev 0xa2) at pci0 dev 1 function 3 not configured > ohci0 at pci0 dev 2 function 0 "NVIDIA MCP67 USB" rev 0xa2: irq 11, version > 1.0, legacy support > ehci0 at pci0 dev 2 function 1 "NVIDIA MCP67 USB" rev 0xa2: irq 10 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1 > ohci1 at pci0 dev 4 function 0 "NVIDIA MCP67 USB" rev 0xa2: irq 10, version > 1.0, legacy support > ehci1 at pci0 dev 4 function 1 "NVIDIA MCP67 USB" rev 0xa2: irq 10 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1 > pciide0 at pci0 dev 6 function 0 "NVIDIA MCP67 IDE" rev 0xa1: DMA, channel 0 > configured to compatibility, channel 1 configured to compatibility > pciide0: channel 0 disabled (no drives) > pciide0: channel 1 ignored (disabled) > ppb0 at pci0 dev 8 function 0 "NVIDIA MCP67 PCI" rev 0xa2 > pci1 at ppb0 bus 1 > re0 at pci1 dev 8 function 0 "D-Link Systems DGE-528T" rev 0x10: > RTL8169/8110SB (0x1000), irq 10, address 00:22:b0:bd:32:61 > rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 3 > emu0 at pci1 dev 10 function 0 "Creative Labs SoundBlaster Audigy 2" rev > 0x00: irq 10 > ac97: codec id 0x83847650 (SigmaTel STAC9750/51) > ac97: codec features headphone, 20 bit DAC, 20 bit ADC, SigmaTel 3D > audio0 at emu0 > pciide1 at pci0 dev 9 function 0 "NVIDIA MCP67 SATA" rev 0xa2: DMA > pciide1: using irq 15 for native-PCI interrupt > wd0 at pciide1 channel 0 drive 0: <Veritech SSD 2009-01> > wd0: 1-sector PIO, LBA48, 30800MB, 63078400 sectors > wd1 at pciide1 channel 0 drive 1: <SAMSUNG HD103UJ> > wd1: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors > wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 > wd1(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 5 > wd2 at pciide1 channel 1 drive 1: <MAXTOR STM3160215AS> > wd2: 16-sector PIO, LBA48, 152627MB, 312581808 sectors > wd2(pciide1:1:1): using PIO mode 4, Ultra-DMA mode 5 > nfe0 at pci0 dev 10 function 0 "NVIDIA MCP67 LAN" rev 0xa2: irq 10, address > 00:19:66:97:0d:31 > rgephy1 at nfe0 phy 3: RTL8169S/8110S PHY, rev. 2 > ppb1 at pci0 dev 11 function 0 vendor "NVIDIA", unknown product 0x0562 rev > 0xa2 > pci2 at ppb1 bus 2 > ppb2 at pci0 dev 12 function 0 "NVIDIA MCP67 PCIE" rev 0xa2 > pci3 at ppb2 bus 3 > ppb3 at pci0 dev 13 function 0 "NVIDIA MCP67 PCIE" rev 0xa2 > pci4 at ppb3 bus 4 > ppb4 at pci0 dev 14 function 0 "NVIDIA MCP67 PCIE" rev 0xa2 > pci5 at ppb4 bus 5 > ppb5 at pci0 dev 15 function 0 "NVIDIA MCP67 PCIE" rev 0xa2 > pci6 at ppb5 bus 6 > ppb6 at pci0 dev 16 function 0 "NVIDIA MCP67 PCIE" rev 0xa2 > pci7 at ppb6 bus 7 > ppb7 at pci0 dev 17 function 0 "NVIDIA MCP67 PCIE" rev 0xa2 > pci8 at ppb7 bus 8 > vga1 at pci0 dev 18 function 0 vendor "NVIDIA", unknown product 0x053b rev > 0xa2 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > drm at vga1 unsupported > pchb0 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00 > pchb1 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00 > pchb2 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00 > kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00: core rev > DH-G1 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > wbsio0 at isa0 port 0x2e/2: W83627EHF rev 0x63 > lm1 at wbsio0 port 0x290/8: W83627EHF > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > usb2 at ohci0: USB revision 1.0 > uhub2 at usb2 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1 > usb3 at ohci1: USB revision 1.0 > uhub3 at usb3 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1 > biomask ff65 netmask ff65 ttymask ffff > mtrr: Pentium Pro MTRR support > uhidev0 at uhub2 port 3 configuration 1 interface 0 "Tsunami SM-2000" rev > 1.00/1.00 addr 2 > uhidev0: iclass 3/1 > ums0 at uhidev0: 3 buttons, Z dir > wsmouse0 at ums0 mux 0 > softraid0 at root > root on wd0a swap on wd0b dump on wd0b > WARNING: / was not properly unmounted > > 2009/7/29 Chris Bennett <ch...@bennettconstruction.biz> > > > What are you trying to get sound from? > > Try turning off the mutes that are on. > > > > mixerctl inputs.cd.mute=off for example. > > > > also, try cdio cdplay , with a music cd (This is pure digital and > > gives better quality than cdio play) > > > > also, add to .profile: > > pgrep -x aucat || aucat -l (someone please correct this for me if it > > has changed more recently) > > > > If this isn't enough, please post a full dmesg, if you have another sound > > system that is integrated into motherboard, you can also have problems > > > > > > > > inputs.cd.mute=onJean-Frangois SIMON wrote: > > > > Hi, > >> > >> I am runing VLC under fvwm but could not have any sound. > >> > >> Are things working by default or there might be something to tune in > >> general, or in my case ? > >> > >> Thanks for help. > >> > >> dmesg | grep audio > >> audio0 at emu0 > >> > >> $ audioctl > >> name=SB Live! > >> version=0x00 > >> config=emuxki > >> > >> > encodings=ulinear:8,mulaw:8*,alaw:8*,slinear:8*,slinear_le:16,ulinear_le:16*, > slinear_be:16*,ulinear_be:16* > >> properties=full_duplex,mmap,independent > >> full_duplex=0 > >> fullduplex=0 > >> blocksize=8192 > >> hiwat=8 > >> lowat=1 > >> output_muted=0 > >> monitor_gain=0 > >> mode= > >> play.rate=48000 > >> play.channels=2 > >> play.precision=16 > >> play.encoding=slinear_le > >> play.gain=255 > >> play.balance=32 > >> play.port=0x0 > >> play.avail_ports=0x0 > >> play.seek=0 > >> play.samples=0 > >> play.eof=0 > >> play.pause=0 > >> play.error=0 > >> play.waiting=0 > >> play.open=0 > >> play.active=0 > >> play.buffer_size=65536 > >> play.block_size=8192 > >> play.errors=0 > >> record.rate=48000 > >> record.channels=2 > >> record.precision=16 > >> record.encoding=slinear_le > >> record.gain=255 > >> record.balance=32 > >> record.port=0x1 > >> record.avail_ports=0x7 > >> record.seek=0 > >> record.samples=0 > >> record.eof=0 > >> record.pause=0 > >> record.error=0 > >> record.waiting=0 > >> record.open=0 > >> record.active=0 > >> record.buffer_size=65536 > >> record.block_size=8192 > >> record.errors=0 > >> > >> $ > >> mixerctl > >> > >> outputs.master=255,255 > >> outputs.master.mute=off > >> outputs.mono=255 > >> outputs.mono.mute=off > >> outputs.mono.source=mixerout > >> outputs.headphones=255,255 > >> outputs.headphones.mute=on > >> inputs.speaker=255 > >> inputs.speaker.mute=off > >> inputs.phone=191 > >> inputs.phone.mute=on > >> inputs.mic=255 > >> inputs.mic.mute=on > >> inputs.mic.preamp=off > >> inputs.mic.source=mic0 > >> inputs.line=255,255 > >> inputs.line.mute=on > >> inputs.cd=255,255 > >> inputs.cd.mute=on > >> inputs.video=191,191 > >> inputs.video.mute=on > >> inputs.aux=255,255 > >> inputs.aux.mute=on > >> inputs.dac=255,255 > >> inputs.dac.mute=off > >> record.source=mic > >> record.volume=255,255 > >> record.volume.mute=off > >> outputs.spatial=off > >> outputs.spatial.center=0 > >> outputs.spatial.depth=0 > >> outputs.extamp=off > -- jake...@sdf.lonestar.org SDF Public Access UNIX System - http://sdf.lonestar.org