As you say Tim very interesting.... 

 

I was unaware that Morgans have their own emissions parameters. Are any of
the Land Rover aficionados out there aware of problems with emissions issues
with petrol Rangies? 

I hope that I will be ok, as my recent repairs involved complete new
exhausts including catalysts (yes both sides) Thank goodness for insurance!

 

I have found on a couple of occasions my +8 was very close to failure, once
I was phoned to take it away for an Italian and bring it back hot when it
passed. 

I now always ensure that the petrol is NOT SUPERMARKET for the test, as on
both the occasions I had issues, it was running on their jungle juice.

With an MOT due early next month I am off to empty the tank with a trip to a
Jockmog lunch at Kilwinning some 80 miles distant so 160 miles should just
about empty the tank.

 

Off out into the sun!!!!!

 

Colin Mackay

 

From: Carpenter, Tim [mailto:[email protected]] 
Sent: 23 May 2012 08:01
To: mogtalk2
Subject: RE: [EXTERNAL][mogtalk2] Sweating at the MOT

 

 

Dave,

 

Very interesting.    This tallies with something Keith at BHM told me, when
I mentioned that my Plus 8 was struggling with the 1.03 lambda high limit.
He said -- don't worry, Morgans have a different limit.   It seems the
tester has to apply the standard test with its limits, and then move on to
the Morgan's exception test, within the testing software.      My tester in
the past few years has managed to get a green reading even though just for a
second, and passed it.    I guess he wanted to avoid having to move to the
extended test.    

 

As suggested though, some testers may be unaware of this for Morgans, so I'm
glad you've found the book of words.       (Which is a very interesting read
-- most tests I've watched haven't really followed the porcedure, and also
I'm amazed quite how many other cars have wider lambda limits).

 

Tim

 

 

 

  _____  

From: Dave Wellings [mailto:[email protected]] 
Sent: 22 May 2012 20:29
To: mogtalk2
Subject: [EXTERNAL][mogtalk2] Sweating at the MOT

Some of you will no doubt know all about this, but here is my story from
yesterday, just posted on Talkmorgan.

 

MOT today. The form has now been dumbed down. Instead of the green hard to
forge certificate, it's a simple white page print out, with any advisories
on the right hand side. 

What's more interesting, and worrying is the Lambda requirement. This
measures the fuel/air ratio at the tailpipe, and is between two parameters,
which for my Morgan is (allegedly) 0.9 to 1.03. This is a very narrow band.
On the screen, this displays as a red band with a narrow green pass band.
The measure is shown as a white bar, and is taken at a prescribed 'fast
idle' - just under 3000rpm. It was a struggle to get below 1.03. After a
couple of attempts the tester managed 1.025. A high reading indicates a leak
in the exhaust system, but both tailpipes produced the same effect. There is
no obvious leak, but the Lambda shows a weak mixture. 
On checking last years result, it was 1.024, so that was right at the top
end. The machine can't be conned, so exceed the limit and you will fail.

The science:
Lambda is a measure for the mass air to fuel ratio present during
combustion. When exactly enough fuel is combined with the available free
oxygen, the mixture is chemically balanced and is called stoichiometric.

Lambda = 1 -stoichiometric mixture

Lambda < 1 -mixture is rich, excess fuel present

Lambda > 1 -mixture is lean, excess air present

The amount of air that is needed depends on the type of fuel used. In the
case of petrol, a stoichiometric mixture consists of an air/fuel ratio of
14.7/1. 
Peak power is at Lambda 0.84 to 0.90
Optimum economy at Lambda = 1.05
Optimum emissions at Lambda slightly below 1.0
Thinks..I wonder if the ECU is set for 'economy'.....

....................................................

More news.
I was concerned enough to look further into this.
The emission data is published each year by VOSA and is here:
http://www.dft.gov.uk/vosa/repository/Emissions%2017th%20Edition.pdf

This is the "In service emission standards for road vehicles" - seventeenth
edition. Published in February 2012 and available on the link above. ISBN
978-0-9549352-7-6

Morgan is on pages 97 and 98.........
The data shown covers the following:
Normal idle:
Max CO limit (%)vol: All models 0.5 

Normal idle speed Min Limit and Max Limit RPM.
Varies as follows:
4/4 1.6EFI CVH 750-850
4/4 1.8EFI MVH 850-950
Roadster 3.0V6EFI 750-900
Plus 4 2.0 T16 850-950
Plus 8 3.5 750-850
Plus 8 3.9 750-900
Plus 8 4.6 750-900
Plus 8 4.0 750-900
4/4 2.0 Duratec 700-900
4/4 1600 Sigma 650-1000
Aero 8, 4.8 Manual/Auto, Max and SS 650-1000

Fast idle
Max CO limit(%vol) 0.3 all models. 

Max HC limit all models: 200

Minimum Lambda: All models 0.9, EXCEPT Plus 8 4.0 and ALL Aero's which are
0.8.

Maximum Lambda: All models 1.05. (NOTE, this means that my 1.025 is well
within parameters).

Minimum RPM - Fast Max limit RPM
4/4 1.6EFI CVH 2800-3100
4/4 1.8EFI MVH 2800-3100
Roadster 3.0V6EFI 2750-3000
Plus 4 2.0 T16 2500-3000
Plus 8 3.5 2500-3000
Plus 8 3.9 2500-3000
Plus 8 4.6 2500-3000
Plus 8 4.0 2500-3000
4/4 2.0 Duratec 2750-3000
4/4 1600 Sigma 2500-3000
Aero 8, 4.8 Manual/Auto, Max and SS 2500-3000.

So if you have any Lambda troubles on test, refer the tester to this tome.

 

By the way, my MOT man is very good, and well used to my odd cars, but was
obviously unaware of the upper Lambda limit for Morgans.
thumbs

 

Dave

 

 

 

 

 











































































 

ConocoPhillips (U.K.) Limited (registered in England and Wales with company
number 524868), ConocoPhillips Petroleum Company U.K. Limited (registered in
England and Wales with company number 792712) and Burlington Resources
(Irish Sea) Limited (registered in England and Wales with company number
3440053) each having its registered office at Portman House, 2 Portman
Street, London W1H 6DU (each company being referred to as the "Company") 

The information in this e-mail is confidential and for use by the
addressee(s) only. Access to this email by anyone else is unauthorised. It
may also be legally privileged. If you are not the intended recipient,
please advise the sender of the error in transmission and delete the message
from your computer. You may not copy or forward the e-mail or use it or
disclose its contents to any other person. The Company does not accept any
liability or responsibility for: (a) changes made to this e-mail after it
was sent or (b) viruses transmitted through this e-mail or any attachment.

 

View posts on The Mail Archive
http://www.mail-archive.com/[email protected]/


 
<https://www.listbox.com/member/?&;
b> Modify Your Subscription

 <http://www.listbox.com> Image removed by sender.

 




-------------------------------------------
View posts on The Mail Archive
http://www.mail-archive.com/[email protected]/ 
[http://www.mail-archive.com/[email protected]/]

Modify Your Subscription: 
https://www.listbox.com/member/?member_id=22459785&id_secret=22459785-4a39ddf8
Powered by Listbox: http://www.listbox.com

<<~WRD088.jpg>>

<<image001.gif>>

Reply via email to