Yea, after noticing the Windows version is 5.3 and AIX 5.2, I'd also guess
that's the most likely scenario. The v5.3 MQExplorer might be sending all
parameters instead of the ones changed and would include things like the
SSL parms which 5.2 wouldn't understand.
Regards,
Marty Frasier
e-mail: [EMAIL PROTECTED]
Rick Tsujimoto <[EMAIL PROTECTED]>
Sent by: MQSeries List <[EMAIL PROTECTED]>
11/08/2002 01:13 PM
Please respond to MQSeries List
To: [EMAIL PROTECTED]
cc:
Subject: Re: AMQ4082 error, reason code 3015
I'm just making a guess, but the problem might be due to NT sending a V5.3
channel parameter that doesn't exist on V5.2. If you have V5.2 on NT, you
can do a quick test to verify if that's the case or not.
Barclay.BW@FORCE
S.GC.CA To: [EMAIL PROTECTED]
Sent by: cc:
MQSeries List Subject: Re: AMQ4082 error,
reason code 3015
<MQSERIES@AKH-Wi
en.AC.AT>
11/08/2002 11:28
AM
Please respond
to MQSeries List
Marty, thanx again. Yes, the NT version is 5.3 and the AIX versions are
5.2.
Could that be the problem?? I will do a trace later and try to see if I
can
spot something. BB.
> -----Original Message-----
> From: Rick Tsujimoto [SMTP:[EMAIL PROTECTED]]
> Sent: Friday, November 08, 2002 9:57 AM
> To: [EMAIL PROTECTED]
> Subject: Re: AMQ4082 error, reason code 3015
>
> Are the versions of your queue managers (NT vs. AIX) different? You
might
> be able to run a trace to see if something is passed that is not
> supported,
> or perhaps mangled.
>
>
>
>
> Barclay.BW@FORCE
> S.GC.CA To:
> [EMAIL PROTECTED]
> Sent by: cc:
> MQSeries List Subject: Re: AMQ4082
error,
> reason code 3015
> <MQSERIES@AKH-Wi
> en.AC.AT>
>
>
> 11/08/2002 09:09
> AM
> Please respond
> to MQSeries List
>
>
>
>
>
> Marty, thanx for your reply. Yes, we are using the MQExplorer and it
seems
> to work for NT based Qmgrs but not remote (eg. AIX) Qmgrs which furthers
> the
> mystery. Actually, a co-worker said he was able to change some AIX Qmgrs
> but
> not others but I have not as yet been able to confirm this. Appreciate
> your
> interest in this matter. BB.
>
> > -----Original Message-----
> > From: Marty Frasier [SMTP:[EMAIL PROTECTED]]
> > Sent: Thursday, November 07, 2002 4:50 PM
> > To: [EMAIL PROTECTED]
> > Subject: Re: AMQ4082 error, reason code 3015
> >
> > Bruce,
> >
> > 3015 in that context sounds like MQRCCF_CFST_PARM_ID_ERROR, meaning
the
> > MQCFST Parameter field wasn't recognized as valid. Strangely enough,
> that
> > sounds like the Windows Console (is that MQExplorer or runmqsc?) is
> > sending a bad PCF command to the AIX qmgr. Conceivably it could be an
> > issue with endianness, but then nothing much would work.
> >
> > Sorry, I've never run into that so can't be of much help other than
> > identifying the likely error code for you.
> >
> > Regards,
> >
> > Marty Frasier
> > e-mail: [EMAIL PROTECTED]
> >
> >
> >
> >
> >
> > [EMAIL PROTECTED]
> > Sent by: MQSeries List <[EMAIL PROTECTED]>
> > 11/07/2002 11:15 AM
> > Please respond to MQSeries List
> >
> >
> > To: [EMAIL PROTECTED]
> > cc:
> > Subject: AMQ4082 error, reason code 3015
> >
> >
> >
> > When I try to key in an entry into the Security Exit Name field of a
> > remote
> > Qmgr on AIX using the Windows/NT Websphere Console, I get an AMQ4082
> error
> > code with a reason code of 3015. Reason code 3015 doesn't seem to be
> > documented anywhere and no matter what steps I take, can't get around
> the
> > problem. If I sign onto AIX, using runmqsc, I can set the Security
Exit
> > Name
> > without problems. Anyone experience this? Help greatly appreciated.
> > Cheers!
> > BB.
> >
> > Bruce Barclay
> > Cell: 613-794-8423
> >
> > Instructions for managing your mailing list subscription are provided
in
> > the Listserv General Users Guide available at http://www.lsoft.com
> > Archive: http://vm.akh-wien.ac.at/MQSeries.archive
> >
> > Instructions for managing your mailing list subscription are provided
in
> > the Listserv General Users Guide available at http://www.lsoft.com
> > Archive: http://vm.akh-wien.ac.at/MQSeries.archive
>
> Instructions for managing your mailing list subscription are provided in
> the Listserv General Users Guide available at http://www.lsoft.com
> Archive: http://vm.akh-wien.ac.at/MQSeries.archive
>
> Instructions for managing your mailing list subscription are provided in
> the Listserv General Users Guide available at http://www.lsoft.com
> Archive: http://vm.akh-wien.ac.at/MQSeries.archive
Instructions for managing your mailing list subscription are provided in
the Listserv General Users Guide available at http://www.lsoft.com
Archive: http://vm.akh-wien.ac.at/MQSeries.archive
Instructions for managing your mailing list subscription are provided in
the Listserv General Users Guide available at http://www.lsoft.com
Archive: http://vm.akh-wien.ac.at/MQSeries.archive
Instructions for managing your mailing list subscription are provided in
the Listserv General Users Guide available at http://www.lsoft.com
Archive: http://vm.akh-wien.ac.at/MQSeries.archive
