> >> Please don't slow down joystick port I/O access on account of JoyNet!
> >If you read carefully, you can see that I mention that the normal
Joystick
> >AND JoyNet can use the full speed very well. I was talking about the
problem
> >that the Z380 would be too fast to read the mouse... Even on a turboR
this
> >is a problem (non-working mouse routines).
>
> Use the BIOS... (-:
Well that's the problem. Almost no program but Illusion City (which actually
might work on Z380 because it doesn't use any non-Z380 R800 opcodes) uses
the BIOS for its mouseroutines (okay all Basic-programs use the BIOS too).
But mouseroutines are just to speed-sensitive to use the BIOS for... If the
BIOS would have bene programmed better... That would be a different story.
By the way, mouse works fine on my 7MHz MSX... Never had any problems... Or
wait a minute! I had! The mouse didn't work with Read Only Magazine (ROM)!!!
However I don't remember if it didn't work on 7MHz or also on 3.5MHz...
~Grauw
--
>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<
email me: [EMAIL PROTECTED] or ICQ: 10196372
visit the Datax homepage at http://datax.cjb.net/
MSX fair Bussum / MSX Marathon homepage: http://msxfair.cjb.net/
>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<
****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
****
