Ike, Can you explain the thought of grounding on one end only? I just terminated 96 1/4" ins/outs for my multitrack and I soldered fully balanced. Are you saying that I should disconnect the shield on one end?
Thanks, Dave Spencer ---- Original Message ---- From: [email protected] To: [email protected] Subject: Re: NEOTEK: Neotek Elite II Pin Out Date: Wed, 11 Aug 2010 11:43:00 -0400 >The wonderful thing about EDAC connectors is that they are really >easy >to reconfigure if they aren't right. > I strongly reccommend that you have your cables wired with the > >sheild terminated at one end only (except the Mic sources, of >course). >Best, > >Ike Zimbel >Zimbel Audio Ltd >416-720-0887 >www.zimbelaudio.com >Sent from my iPhone > >On 2010-08-11, at 11:16 AM, Jon King <[email protected]> wrote: > >> Ike, >> >> I'm doing my best to find that out from the gentlemen I'm buying >the >> desk from (the split connector idea).. It's a 40 channel with >> audiomate. Thanks again for the input! >> >> Jon >> >> >> >> >> On Aug 11, 2010, at 10:10 AM, Ike wrote: >> >>> Hi Jon >>> I was just looking at an old post from a list member who had > >>> gotten his Elite snakes made by Redco. So they should have it on >>> file. I have never seen any variation in the order of the pin-out > >>> which is (from memory, I'm on vacation...): >>> a-1+ >>> k-1- >>> v-1 sheild >>> It then continues across the connector in rows of eight channels. >>> The "custom" stuff is usually whether they put all 40 >tape- >>> outs on one connector (on a 40 ch desk) or split it up over two >>> connectors. >>> Hope this helps. >>> Best, >>> Ike Zimbel >>> Zimbel Audio Ltd >>> 416-720-0887 >>> www.zimbelaudio.com >>> Sent from my iPhone >>> >>> On 2010-08-11, at 9:36 AM, Jon King <[email protected]> wrote: >>> >>>> Hey Guys, >>>> >>>> I'm sure you all have had this question 5000 times. I'm looking >>>> for an Elco Pin Out for a 1999-2000 Neotek Elite 2. I'm in >>>> process of purchase and I'm trying to get Redco started on the >>>> snakes. I'm just having no luck finding a pin out for Mic Lines / > >>>> Multi Track Sends / Multi Track Returns. I understand these >>>> consoles were quasi custom but surely there has to be some sort >of >>>> standard of this. Thanks in advance! >>>> >>>> Jon >>>> >>>> >>>> -------------------------------------- >>>> Jon King >>>> Producer/Songwriter >>>> Page 2 Music Inc. >>>> Nashville, TN. >>>> (270)-366-2674 >>>> >>>> >>>> >> >> -------------------------------------- >> Jon King >> Producer/Songwriter >> Page 2 Music Inc. >> Nashville, TN. >> (270)-366-2674 >> >> >> ------ View the list online at: http://www.mail-archive.com/[email protected] You can unsubscribe at anytime by sending an email to mailto:[email protected] with "unsubscribe neotek" in the message body. If you have any difficulties, or questions --please send an email to mailto:[email protected]. The Neotek list is lovingly hosted by Catapult Web. Remember that any message or reply sent to the list will be automatically forwarded to all subscribers. Vive Le Neotek! Thanks.
