Hi gang,
have some new info and I will recap some of the old for any newcomers. I
still haven't got it to work yet, but learned a couple valuable things.
First the Linux box has two network cards (eth0 and eth1)
The eth0 card is configured as 192.168.1.1 with a netmask of 255.255.255.0
The eth1 card is configured as 192.168.1.2 with a netmask of 255.255.255.128
All other windows machines on the LAN are 192.168.1.X and 255.255.255.128
The router is set up as defualt. The only items I have entered into the
router are:
set ppp wan0-0 ipcp 0.0.0.0
set ppp wan0-0 dns 0.0.0.0
set ppp restart enabled
set dhcp server enabled
set nat enabled
and login and passwords.
This is what USWEST has in the book. This setup is currently working plugged
into my hub.
What I just realized doing a winipcfg in windows was the Cisco 675 router
has the following. I am going to add all info beacuse I am not sur if it is
relevent.
Host name Rich
DNS servers 207.108.32.1 and 204.147.80.5
Node type =broadcast
IP address 10.0.0.2
Subnet Mask 255.255.255.0
Default gateway 10.0.0.1
DHCP server 10.0.0.1
I think I read somewhere that NAT sets up these default address's.
I am thinking this info needs to be entered under routing in netcfg??
Under routing I have :
default gateway____________
default gateway device__________
And then if I click add I get
Device_________________
Network_______________
Netmask_______________
Gateway_______________
Anyone care to fill in the blanks ?
I have tried to ping the router at 10.0.0.1 and 2 and cant get a response.
Thanks all :)
Rich
