On Sat, 26 Jun 1999, Dan Brown wrote:
> From: Rich McCabe <[EMAIL PROTECTED]>
>
> > The eth0 card is configured as 192.168.1.1 with a netmask of
> 255.255.255.0
>
> OK, it sounds like your router is configured to be on a different
> network. Assuming that your eth0 card is the one that's connected to
> the router, set its IP to 10.0.0.x, where 2=<x=<254. Do likewise with
> all other machines on the network. Alternatively, you might try
> enabling dhcp on the linux box (and the other machines).
>
> > default gateway____________
> > default gateway device__________
>
> 10.0.0.1 for both, I believe.
10.0.0.1 and eth(X)
> > And then if I click add I get
> >
> > Device_________________
> > Network_______________
> > Netmask_______________
> > Gateway_______________
>
> You wouldn't need to add another network interface, AFAIK.
Thats the route add box i believe, you could go this route (adding a
static route for the 10.0.0.0 network, but you'd need to add the
192.168.1.0 network into the routers routeing table
> > I have tried to ping the router at 10.0.0.1 and 2 and cant get a
> response.
>
> The router is at .1; 10.0.0.2 seems to be your Win box. My guess is
> that your Linux box doesn't know how to route to 10.0.0.1, which is why
> it doesn't get a response.
>
> I'm not sure, though, why you have two NICs in the Linux box. With
> this setup (using a separate router), you shouldn't need a second one.
>
Probably for load balanceing..
