On Saturday 14 June 2003 07:54 am, Dennis Myers wrote:

>
> This is one of those rare instances where you  may have to reboot, I can
> not find a way for the plugins to activate without a reboot. Same with
> lm_sensors. HTH

Dennis, got lm_sensors installed, got the gkrellm sensor plugin installed, 
setup, but temp/fan readings aren't correct.  If I run 'sensors' from the cl 
I get:

[EMAIL PROTECTED] chris]$ sensors
lm80-i2c-0-2d
Adapter: SMBus Via Pro adapter at 5000
Algorithm: Non-I2C SMBus adapter
+5V:       +4.55 V  (min =  +4.74 V, max =  +0.00 V)   ALARM
VTT:       +1.64 V  (min =  +1.90 V, max =  +2.10 V)   ALARM
+3.3V:     +2.50 V  (min =  +3.13 V, max =  +3.46 V)   ALARM
+Vcore:    +3.01 V  (min =  +1.80 V, max =  +1.99 V)   ALARM
+12V:     +13.26 V  (min = +11.37 V, max = +12.57 V)   ALARM
-12V:      -9.56 V  (min = -12.41 V, max = -11.20 V)
-5V:       -3.77 V  (min =  -5.16 V, max =  -4.64 V)   ALARM
fan1:     10629 RPM  (min = 6000 RPM, div = 1)
fan2:     9642 RPM  (min = 6000 RPM, div = 1)
temp:     +127.00 °C (hot:limit =  +6°C,  hysteresis =  +5°C) ALARM
         (os: limit =  +6°C,  hysteresis =  +5°C) ALARM
alarms:   Board temperature input (LM75)               ALARM
alarms:   Chassis intrusion detection                  ALARM

eeprom-i2c-0-50
Adapter: SMBus Via Pro adapter at 5000
Algorithm: Non-I2C SMBus adapter
Memory type:            SDRAM DIMM SPD
SDRAM Size (MB):        128

eeprom-i2c-0-51
Adapter: SMBus Via Pro adapter at 5000
Algorithm: Non-I2C SMBus adapter
Memory type:            SDRAM DIMM SPD
SDRAM Size (MB):        128

Which I know is wrong for the temp and probably for the voltages.  The memory 
reported is wrong, I have 256mb ram. When I rebooted awhile ago the cpu temp 
reported by the bios was 104F.  Checking processes it shows lm_sensors is 
running and it shows start at boot.  Another question I have is at the end of 
setting up lm_sensors it tells me to copy prog/init/lm_sensors.init to 
/etc/rc.d/init.d/lm_sensors can't find prog/init/lm_sensors but I guess since 
it did start at boot that this isn't necessary.  My cpu info is an AMD 1.2Ghz 
T-Bird

So, bottom line, where have I screwed up my setup?

Thanks for any help

-- 
  Regards
  Chris
  Registered Linux User 283774 http://counter.li.org
  5:09pm  up 28 min,  2 users,  load average: 0.06, 0.09, 0.08


Want to buy your Pack or Services from MandrakeSoft? 
Go to http://www.mandrakestore.com

Reply via email to