avora wrote: > I got a similar issue while browsing > http://groups.google.com/group/open-iscsi/browse_thread/thread/3c9c37903e40cd6f > > I wanted to enable logging as mentioned in above link. > ---- > echo 1 > /sys/module/libiscsi/parameters/debug_libiscsi_conn > echo 1 > /sys/module/libiscsi/parameters/debug_libiscsi_session > echo 1 > /sys/module/libiscsi/parameters/debug_libiscsi_eh > echo 1 > /sys/module/iscsi_tcp/parameters/debug_iscsi_tcp > echo 1 > /sys/module/libiscsi_tcp/parameters/debug_libiscsi_tcp > --- > > But on my machine I only see. > > # ls /sys/module/libiscsi/ > refcnt sections srcversion > > # ls /sys/module/iscsi_tcp/ > parameters refcnt sections srcversion > > # ls /sys/module/iscsi_tcp/parameters/max_lun > /sys/module/iscsi_tcp/parameters/max_lun >
Your open-iscsi version is older and does not have those settings. > > # iscsiadm -m session -P 1 > Target: iqn.1992-04.com.emc:cx.ckm00091100683.a3 > ........ > iSCSI Connection State: TRANSPORT WAIT > iSCSI Session State: FAILED > Internal iscsid Session State: REPOEN > > You might be seeing something else. >>> Dec 7 18:42:06 cdc-r710s1 iscsid: connection2:0 is operational after >>> recovery (1 attempts) After the conn error message do you see one of these right away? -- You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to open-is...@googlegroups.com. To unsubscribe from this group, send email to open-iscsi+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/open-iscsi?hl=en.