Yes Mike, the recovery message is seen right away. Dec 7 18:42:06 cdc-r710s1 iscsid: connection2:0 is operational after recovery (1 attempts)
'conn error' and 'recovery' are seen one after the other, continuosly. On Dec 10, 8:04 am, Mike Christie <micha...@cs.wisc.edu> wrote: > avora wrote: > > I got a similar issue while browsing > >http://groups.google.com/group/open-iscsi/browse_thread/thread/3c9c37... > > > I wanted to enable logging as mentioned in above link. > > ---- > > echo 1 > /sys/module/libiscsi/parameters/debug_libiscsi_conn > > echo 1 > /sys/module/libiscsi/parameters/debug_libiscsi_session > > echo 1 > /sys/module/libiscsi/parameters/debug_libiscsi_eh > > echo 1 > /sys/module/iscsi_tcp/parameters/debug_iscsi_tcp > > echo 1 > /sys/module/libiscsi_tcp/parameters/debug_libiscsi_tcp > > --- > > > But on my machine I only see. > > > # ls /sys/module/libiscsi/ > > refcnt sections srcversion > > > # ls /sys/module/iscsi_tcp/ > > parameters refcnt sections srcversion > > > # ls /sys/module/iscsi_tcp/parameters/max_lun > > /sys/module/iscsi_tcp/parameters/max_lun > > Your open-iscsi version is older and does not have those settings. > > > > > # iscsiadm -m session -P 1 > > Target: iqn.1992-04.com.emc:cx.ckm00091100683.a3 > > ........ > > iSCSI Connection State: TRANSPORT WAIT > > iSCSI Session State: FAILED > > Internal iscsid Session State: REPOEN > > You might be seeing something else. I did not get what exactly you meant > > >>> Dec 7 18:42:06 cdc-r710s1 iscsid: connection2:0 is operational after > >>> recovery (1 attempts) > > After theconnerrormessage do you see one of these right away? -- You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to open-is...@googlegroups.com. To unsubscribe from this group, send email to open-iscsi+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/open-iscsi?hl=en.
