Is CHAP configured on the array? -----Original Message----- From: open-iscsi@googlegroups.com [mailto:open-is...@googlegroups.com] On Behalf Of Mike Christie Sent: Wednesday, December 09, 2009 9:54 PM To: open-iscsi@googlegroups.com Subject: Re: SLES10 SP3 x86_64 - connection2:0: detected conn error (1011)
avora wrote: > I do not see ping/nop timeout message in the logs > (probably that's why changing the noop timeouts did not work). > Simply starting the session does not cause these errors. > On starting the second session, I start a daemon > that does SCSI commands like INQUIRY on all the paths. > After that I see these messages, and the daemon gets stuck > for a very long time waiting for SCSI commands to finish. > > At the backend I have EMC CLARiiON. > > # iscsiadm -m node -P 1 > Target: iqn.1992-04.com.emc:cx.ckm00091100683.a2 > Portal: 192.168.10.1:3260,1 > Iface Name: iface0 > Target: iqn.1992-04.com.emc:cx.ckm00091100683.b2 > Portal: 192.168.12.1:3260,3 > Iface Name: iface1 Does the same path always fail? If you log into one can you use it, then if you logout and log into the other does that other one then work? Is there any info the clarrion logs? -- You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to open-is...@googlegroups.com. To unsubscribe from this group, send email to open-iscsi+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/open-iscsi?hl=en. -- You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to open-is...@googlegroups.com. To unsubscribe from this group, send email to open-iscsi+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/open-iscsi?hl=en.
