Antonio Ospite escreveu:
On Sat, 15 May 2010 13:32:52 -0300
"Luis Claudio R. Goncalves" <lclau...@uudg.org> wrote:
Antonio:
| >| >| >If you use "param" in menu.lst you have to pass a full command line to
| >| >| >the kernel, try:
| >| >| >
| >| >| >mem=...@0xa0000000 mem=...@0xac000000 console=tty1 root=/dev/mmcblk0p2
| >| >| >rootfstype=ext2 rootdelay=3
| >| >| >ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug
| >| >| >
Angelo:
| >| >| Ok...
| >| >| | Worked for me placing root=b301 (partition),but i need telnet
| >| >the
| >| >| cell for my project. What the ip,how to configure the ip on
| >| >| boot-options?
| >| >| | I trying 192.168.0.2 ; 192.168.1.2 ; but don´t work..
| >| >| Thankyou. I send this email to you and
| >| >| openezx-de...@lists.openezx.org. It´s correct?
| >| >
It's fine how you sent the mail, thanks.
Luis:
| >| >Angelo,
| >| >
| >| >Your kernel command line has, along with other parameters, these:
| >| >
| >| > ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug
| >| >
| >| >In short, you can ssh to 192.168.0.200. In order to be able to ssh my
phone
| >| >I have to perform the following steps:
| >| >
Correction, phone IP will be 192.168.0.202 with 2 not 0 as last digit.
I suggest you follow
http://wiki.openmoko.org/wiki/USB_Networking#Simple_Manual_Linux_Configuration
Which should definitely work for us as well.
Luis' steps might work but they looked different from how we generally
do this.
Angleo,
All the stepsI mentioned are supposed to be executed on your PC, not on the
phone. So, if your kernel is booting fine on the phone, you don't need to
mess with it :)
Agreed!
Regards,
Antonio
P.S. please try quoting only the relevant part on reply :)
Friends.
Thank you for all help. It work here,the Android Linux it running now in
my cell.
But others kernels don´t work..
But all ok.
Thank you....!!!!!!!!!!!!
Thanks OPENEZX.
