>>>>> "Matthias" == Matthias Welwarsky <[email protected]> writes:
Matthias> You will always have the best performance if you carefully
Matthias> tweak your write speed so that you reach optimum performance
Matthias> without ever producing a WAIT response. HLA adapters or
Matthias> CMSIS-DAP with SWD have a clear advantage here, because they
Matthias> can do a proper synchronous WAIT at the JTAG or SWD link layer
Matthias> and not up in the ADI protocol.
Hello,
tweaking non-HLA Adapter sounds very heuristic. Provide long enough wait
times between flash write to satify the maximum datasheet flash write delay.
This is the deterministic way. That way is not as fast as tweaking, but
OpenOCD has already much too many parameters to tweak...
Bye
--
Uwe Bonnes [email protected]
Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt
--------- Tel. 06151 1623569 ------- Fax. 06151 1623305 ---------
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
OpenOCD-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openocd-devel
