>>>>> "Tomas" == Tomas Vanek via OpenOCD-devel
>>>>> <openocd-devel@lists.sourceforge.net> writes:
...
>> reset init
Tomas> ...
>> adapter_khz
Tomas> adapter speed: 3000 kHz
>> dap memaccess
Tomas> memory bus access delay set to 8 tck
>> targets f7.cpu flash write_image 64kib.bin 0x08020000
Tomas> wrote 65536 bytes from file 64kib.bin in 0.743568s (86.071 KiB/s)
>> targets f4.cpu flash write_image 64kib.bin 0x08020000
Tomas> wrote 65536 bytes from file 64kib.bin in 0.763147s (83.863 KiB/s)
Just for reference: Can anybody test what number gdb reports for the "load"
command in that circumstances?
Thanks
--
Uwe Bonnes b...@elektron.ikp.physik.tu-darmstadt.de
Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt
--------- Tel. 06151 1623569 ------- Fax. 06151 1623305 ---------
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
OpenOCD-devel mailing list
OpenOCD-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openocd-devel
