Dear Tommy,
i found a file on internet named 99-openocd.rules
and added
# Atmel-ICE JTAG/SWD in-circuit debugger
ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2141", MODE="664", GROUP="plugdev"
to it and placed it in /etc/udev/rules.d
still no succes. How can I check if a non superuser can use this device?
kind regards, Andries
From: Tommy Murphy <[email protected]>
Sent: Wednesday, November 20, 2019 15:25
To: [openocd:tickets] <[email protected]>
Subject: [openocd:tickets] Re: #258 sudo apt install openocd
Doesn't look like there's any openocd udev rules file installed so?
You need a udev rule for your programmer to allow openocd non root/su access to
your programmer.
If this was working for you before but is no longer working on the same machine
then something obviously must've changed.
http://openocd.org/doc/html/Running.html
________________________________
[tickets:#258]<https://sourceforge.net/p/openocd/tickets/258/> sudo apt install
openocd
Status: new
Milestone: 0.9.0
Labels: openOCD arduino no port
Created: Wed Nov 20, 2019 12:22 PM UTC by Andries Oyens
Last Updated: Wed Nov 20, 2019 01:57 PM UTC
Owner: Paul Fertser
Dear people,
I used to program with arduino ade SAMD21 boards (as a ArduinoZero) with Atmel
SAM-ICE. Suddenly the Arduino IDE does no see the Atmel SAM-ICE programmer on a
USB port.
typing openocd in terminal finds the programmer and connected board.
What can I do to find the programmer in the Arduino IDE?
kind regards, Andries
________________________________
Sent from sourceforge.net because you indicated interest in
https://sourceforge.net/p/openocd/tickets/258/
To unsubscribe from further messages, please visit
https://sourceforge.net/auth/subscriptions/
---
** [tickets:#258] sudo apt install openocd**
**Status:** new
**Milestone:** 0.9.0
**Labels:** openOCD arduino no port
**Created:** Wed Nov 20, 2019 12:22 PM UTC by Andries Oyens
**Last Updated:** Wed Nov 20, 2019 01:57 PM UTC
**Owner:** Paul Fertser
Dear people,
I used to program with arduino ade SAMD21 boards (as a ArduinoZero) with Atmel
SAM-ICE. Suddenly the Arduino IDE does no see the Atmel SAM-ICE programmer on a
USB port.
typing openocd in terminal finds the programmer and connected board.
What can I do to find the programmer in the Arduino IDE?
kind regards, Andries
---
Sent from sourceforge.net because [email protected] is
subscribed to https://sourceforge.net/p/openocd/tickets/
To unsubscribe from further messages, a project admin can change settings at
https://sourceforge.net/p/openocd/admin/tickets/options. Or, if this is a
mailing list, you can unsubscribe from the mailing list._______________________________________________
OpenOCD-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openocd-devel
