On Tue, Oct 14, 2008 at 6:03 PM, Dirk Behme <[EMAIL PROTECTED]> wrote: > Øyvind Harboe wrote: >>> >>> (I don't have one - so I can't make it happen). >> >> >> If someone wants to see support for this, then a good start is to >> put a target board in the mail to Duane + me. > > Not sure if you like/are able to pay for it, but US-$ 150 is a really good > price for Beagles:
It looks like a nice product. The price is irrelevant w.r.t. putting the effort into adding JRC support though. That either takes a commercial motivation or a dash of "open source madness" :-) But as a general rule we gratefully accept PCBs to be put into the test farm. A fair number have built up so far... > > http://elinux.org/BeagleBoard#Availability > > http://mkt.digikey.com/ga/pages/beagleboard.html > > TinCanTools has some serial/JTAG adapters (for their Flyswatter) that might > help: > > http://tincantools.com/product.php?productid=16144 > > Dirk > -- Øyvind Harboe http://www.zylin.com/zy1000.html ARM7 ARM9 XScale Cortex JTAG debugger and flash programmer Free eCos workshop in Oslo October 21! http://www.zylin.com/workshop.html _______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
