MichelinoK wrote: > "Hinko Kocevar" <[EMAIL PROTECTED]> ha scritto nel messaggio > news:[EMAIL PROTECTED] >> MichelinoK wrote: >>> "Hinko Kocevar" <[EMAIL PROTECTED]> ha scritto nel messaggio >>> news:[EMAIL PROTECTED] >>>> MichelinoK wrote: >>>>> Thanks for the quick answer :) >>>>> >>>>> Just a question... what do you think I should do to get a working 8mb >>>>> image? >>>>> I mean....does the 4mb images work or not? >>>> I think it should work - 4Mb will be left unused. >>>> >>>> (I cannot test 4mb images) >>>> >>>> Why not? >>> Because the flash process just quit after some seconds before starting >>> the >>> flash procedure, and it leave the foxboard untouched :( >> Strange. I think I was able to flash Axis dev82 development board that >> bears 6Mb of NOR flash with 4Mb image, but that was looong time ago. Maybe >> I'll dust dev82 off and try again.. >> >> Are you are using boot_linux and e100boot tools from Axis for flashing? >> Could you please post the error here. > > I've tryed the Axis files and the files in the trunk...the results are > identical. > > Here's the result of the flashing with 8mb images (I've changed the image > size inside the makefile): > > [EMAIL PROTECTED] pippo]# ./boot_linux -F -d eth0 -i > openwrt-etrax-jffs2-64k-fimage > Using internal boot loader: INTERNAL_NW - Network boot (default). > Starting boot... > We're doing a flash write, this may take up to a few minutes... > > Device ID = 0x000022ae > This bootloader was built by root on Wed May 16 21:31:41 CEST 2007. > Checksum of bootloader is 0x000a0a94 > Waiting for load info. > Checksum of file is 0x00000cea > Got load info. > SET_REGISTER > 0xb0000000 > 0x000095a6 > SET_REGISTER > 0xb0000004 > 0x00000104 > SET_REGISTER > 0xb000000c > 0x1a200040 > SET_REGISTER > 0xb0000008 > 0x00005611 > SET_REGISTER > 0xb0000030 > 0x00001c00 > SET_REGISTER > 0xb0000038 > 0x000000ff > PACKET_INFO > 0xc0004000 > 0x00800000 > Checksum of file is 0x00000000 > FLASH > 0xc0004000 > 0x00000000 > 0x00800000 > Found 1 x CFI at 0x80000000 > No single x16 at 0x84000000 > No interleaved x16 at 0x84000000 > 0x80000000: No need to write > 0x80010000: No need to write > 0x80020000: No need to write > 0x80030000: No need to write > 0x80040000: No need to write > 0x80050000: No need to write > 0x80060000: No need to write > 0x80070000: No need to write > 0x80080000: No need to write > 0x80090000: No need to write > 0x800a0000: No need to write > 0x800b0000: No need to write > 0x800c0000: No need to write > 0x800d0000: No need to write > 0x800e0000: No need to write > 0x800f0000: No need to write > 0x80100000: No need to write > 0x80110000: No need to write > 0x80120000: No need to write > 0x80130000: No need to write > 0x80140000: No need to write > 0x80150000: No need to write > 0x80160000: No need to write > 0x80170000: No need to write > 0x80180000: No need to write > 0x80190000: No need to write > 0x801a0000: No need to write > 0x801b0000: No need to write > 0x801c0000: No need to write > 0x801d0000: No need to write > 0x801e0000: No need to write > 0x801f0000: No need to write > 0x80200000: No need to write > 0x80210000: No need to write > 0x80220000: No need to write > 0x80230000: No need to write > 0x80240000: No need to write > 0x80250000: No need to write > 0x80260000: No need to write > 0x80270000: No need to write > 0x80280000: No need to write > 0x80290000: No need to write > 0x802a0000: No need to write > 0x802b0000: No need to write > 0x802c0000: No need to write > 0x802d0000: No need to write > 0x802e0000: No need to write > 0x802f0000: No need to write > 0x80300000: No need to write > 0x80310000: No need to write > 0x80320000: No need to write > 0x80330000: No need to write > 0x80340000: No need to write > 0x80350000: No need to write > 0x80360000: No need to write > 0x80370000: No need to write > 0x80380000: No need to write > 0x80390000: No need to write > 0x803a0000: No need to write > 0x803b0000: No need to write > 0x803c0000: No need to write > 0x803d0000: No need to write > 0x803e0000: No need to write > 0x803f0000: No need to write > 0x80400000: No need to write > 0x80410000: No need to write > 0x80420000: No need to write > 0x80430000: No need to write > 0x80440000: No need to write > 0x80450000: No need to write > 0x80460000: No need to write > 0x80470000: No need to write > 0x80480000: No need to write > 0x80490000: No need to write > 0x804a0000: No need to write > 0x804b0000: No need to write > 0x804c0000: No need to write > 0x804d0000: No need to write > 0x804e0000: No need to write > 0x804f0000: No need to write > 0x80500000: No need to write > 0x80510000: No need to write > 0x80520000: No need to write > 0x80530000: No need to write > 0x80540000: No need to write > 0x80550000: No need to write > 0x80560000: No need to write > 0x80570000: No need to write > 0x80580000: No need to write > 0x80590000: No need to write > 0x805a0000: No need to write > 0x805b0000: No need to write > 0x805c0000: No need to write > 0x805d0000: No need to write > 0x805e0000: No need to write > 0x805f0000: No need to write > 0x80600000: No need to write > 0x80610000: No need to write > 0x80620000: No need to write > 0x80630000: No need to write > 0x80640000: No need to write > 0x80650000: No need to write > 0x80660000: No need to write > 0x80670000: No need to write > 0x80680000: No need to write > 0x80690000: No need to write > 0x806a0000: No need to write > 0x806b0000: No need to write > 0x806c0000: No need to write > 0x806d0000: No need to write > 0x806e0000: No need to write > 0x806f0000: No need to write > 0x80700000: No need to write > 0x80710000: No need to write > 0x80720000: No need to write > 0x80730000: No need to write > 0x80740000: No need to write > 0x80750000: No need to write > 0x80760000: No need to write > 0x80770000: No need to write > 0x80780000: No need to write > 0x80790000: No need to write > 0x807a0000: No need to write > 0x807b0000: No need to write > 0x807c0000: No need to write > 0x807d0000: No need to write > 0x807e0000: No need to write > 0x807f0000: No need to write > 0x807f2000: No need to write > 0x807f4000: No need to write > 0x807f6000: No need to write > 0x807f8000: No need to write > 0x807fa000: No need to write > 0x807fc000: No need to write > 0x807fe000: No need to write > 0x80000000: Verifying...OK > JUMP > 0x00000000 > END > Exiting with code 0 > > > > > > And here's the result with 4mb image: > > > > [EMAIL PROTECTED] pippo]# ./boot_linux -F -d eth0 -i > openwrt-etrax-jffs2-64k-fimage > Using internal boot loader: INTERNAL_NW - Network boot (default). > Starting boot... > We're doing a flash write, this may take up to a few minutes... > > Device ID = 0x0000547d > This bootloader was built by root on Wed May 16 21:31:41 CEST 2007. > Checksum of bootloader is 0x000a0a94 > Waiting for load info. > Checksum of file is 0x00000c6a > Got load info. > SET_REGISTER > 0xb0000000 > 0x000095a6 > SET_REGISTER > 0xb0000004 > 0x00000104 > SET_REGISTER > 0xb000000c > 0x1a200040 > SET_REGISTER > 0xb0000008 > 0x00005611 > SET_REGISTER > 0xb0000030 > 0x00001c00 > SET_REGISTER > 0xb0000038 > 0x000000ff > PACKET_INFO > 0xc0004000 > 0x00400000 > Checksum of file is 0x00000000 > FLASH > 0xc0004000 > 0x00000000 > 0x00400000 > Found 1 x CFI at 0x80000000 > No single x16 at 0x84000000 > No interleaved x16 at 0x84000000 > 0x80000000: No need to write > 0x80010000: No need to write > 0x80020000: No need to write > 0x80030000: No need to write > 0x80040000: No need to write > 0x80050000: No need to write > 0x80060000: No need to write > 0x80070000: No need to write > 0x80080000: No need to write > 0x80090000: No need to write > 0x800a0000: No need to write > 0x800b0000: No need to write > 0x800c0000: No need to write > 0x800d0000: No need to write > 0x800e0000: No need to write > 0x800f0000: No need to write > 0x80100000: No need to write > 0x80110000: No need to write > 0x80120000: No need to write > 0x80130000: No need to write > 0x80140000: No need to write > 0x80150000: No need to write > 0x80160000: No need to write > 0x80170000: No need to write > 0x80180000: No need to write > 0x80190000: No need to write > 0x801a0000: No need to write > 0x801b0000: No need to write > 0x801c0000: No need to write > 0x801d0000: No need to write > 0x801e0000: No need to write > 0x801f0000: No need to write > 0x80200000: No need to write > 0x80210000: No need to write > 0x80220000: No need to write > 0x80230000: No need to write > 0x80240000: No need to write > 0x80250000: No need to write > 0x80260000: No need to write > 0x80270000: No need to write > 0x80280000: No need to write > 0x80290000: No need to write > 0x802a0000: No need to write > 0x802b0000: No need to write > 0x802c0000: No need to write > 0x802d0000: No need to write > 0x802e0000: No need to write > 0x802f0000: No need to write > 0x80300000: No need to write > 0x80310000: No need to write > 0x80320000: No need to write > 0x80330000: No need to write > 0x80340000: No need to write > 0x80350000: No need to write > 0x80360000: No need to write > 0x80370000: No need to write > 0x80380000: No need to write > 0x80390000: No need to write > 0x803a0000: No need to write > 0x803b0000: No need to write > 0x803c0000: No need to write > 0x803d0000: No need to write > 0x803e0000: No need to write > 0x803f0000: No need to write > 0x80000000: Verifying...OK > JUMP > 0x00000000 > END > Exiting with code 0 > >
Both outputs look sane - could you please post the output of these two commands as well: 2. ./boot_linux -F -d eth0 -i openwrt-etrax-jffs2-64k-fimage -p > > REMEMBER....the flash procedure leaves the board untouched... > I see that the tools try to put the image on flash, but as it turns out the flash and the image are obviously the same, byte-for-byte, probably because you flashed it at least one time before. That is why the tools leave flash untouched. Try a dummy image, old image or another image and then use the openwrt image on top of that - this should result in messages like this: .. 0x80010000: Erasing 0x00010000 bytes 0x80010000: Writing 0x00010000 bytes 0x80020000: Erasing 0x00010000 bytes .. Meaning that flash is being replaced. > Currently I'm using and old port of John Crispin, the porting is now called > "CrisOS" and you can find it at www.crisos.org. Haven't spotted this one yet. > It works, but it's rather old....and I wanna use the official trunk of > kamikaze. > I hope you can find the problem :) > If you wanna, I can send you the 2 images (zip/rar),just let me know a valid > e:mail address. > I don't own a foxboard - instead at work we use etrax lx100 in our embedded products. You can send the images but I can't guarantee that it will work any better because of the SDRAM and/or FLASH settings in the kernel image. Just this email for images. Reagrds, Hinko -- ČETRTA POT, d.o.o., Kranj Planina 3 4000 Kranj Slovenia, Europe Tel. +386 (0) 4 280 66 03 E-mail: [EMAIL PROTECTED] Http: www.cetrtapot.si _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
