Have a chat to a stamp maker. I'm sure you aren't the first person to want a metal stamp and certainly won't be the last. A laser cutter will be able to do what you want, but they are restricted by the width of the cutting "beam", which in the cases I've seen is actually quite wide, something in the area of 1mm.
Worst case scenario is you will need to go to a jeweller. Keith Peck Consultant SMS Management & Technology T +61 7 3215 7200 F +61 7 3215 7100 www.smsmt.com<http://www.smsmt.com/><http://www.smsmt.com/> ________________________________ From: ozdotnet-boun...@ozdotnet.com [ozdotnet-boun...@ozdotnet.com] On Behalf Of mike smith [meski...@gmail.com] Sent: Thursday, 21 July 2011 11:24 AM To: ozDotNet Subject: Re: Anyone got some sort laser cutter better than a CNC lathe? So something like a branding iron onto leather. (or forehead[1]) :^) Of course, if you're using a laser, you could use that direct on end material to produce code. But maybe you want to sell the stamp to ppl without a laser. [1] a QR code that would take you to www.thenumberofthebeast.com<http://www.thenumberofthebeast.com><http://www.thenumberofthebeast.com> On Thu, Jul 21, 2011 at 11:05 AM, David Connors <da...@codify.com<mailto:da...@codify.com>> wrote: On Thu, Jul 21, 2011 at 11:04 AM, mike smith <meski...@gmail.com<mailto:meski...@gmail.com>> wrote: Sounds intriguing. If it aint secret, and you'd have to kill us all if you told us, go on... Ideas that occur are does it have to be metal, could you make it with some of the 3d printer stuff that's starting to happen? I want to make a metal stamp (to be applied with heat) in the form of a low/medium density QR code. -- David Connors | da...@codify.com<mailto:da...@codify.com> | www.codify.com<http://www.codify.com><http://www.codify.com> Software Engineer Codify Pty Ltd Phone: +61 (7) 3210 6268<tel:%2B61%20%287%29%203210%206268> | Facsimile: +61 (7) 3210 6269<tel:%2B61%20%287%29%203210%206269> | Mobile: +61 417 189 363<tel:%2B61%20417%20189%20363> V-Card: https://www.codify.com/cards/davidconnors Address Info: https://www.codify.com/contact -- Meski http://courteous.ly/aAOZcv "Going to Starbucks for coffee is like going to prison for sex. Sure, you'll get it, but it's going to be rough" - Adam Hills ________________________________ NOTICE - This communication is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking any action in reliance on, this communication by persons or entities other than the intended recipient is prohibited. If you are not the intended recipient of this communication please delete and destroy all copies and telephone SMS Management & Technology on 1300 842 767 immediately. Any views expressed in this Communication are those of the individual sender, except where the sender specifically states them to be the views of SMS Management & Technology. Except as required by law, SMS Management & Technology does not represent, warrant and/or guarantee that the integrity of this communication has been maintained nor that the communication is free from errors, virus, interception or interference.
