Mention my name, they'll charge you more ;)
Brother in laws family runs it On Jul 21, 2011 9:45 AM, "David Connors" <da...@codify.com> wrote: > On Thu, Jul 21, 2011 at 11:25 AM, Keith Peck <kp...@smsmt.com> wrote: > >> Have a chat to a stamp maker. I'm sure you aren't the first person to >> want a metal stamp and certainly won't be the last. >> A laser cutter will be able to do what you want, but they are restricted by >> the width of the cutting "beam", which in the cases I've seen is actually >> quite wide, something in the area of 1mm. >> >> Worst case scenario is you will need to go to a jeweller. >> > > Yeah that'll start getting too expensive for what I am setting up as > essentially a gag at TechEd this year. > > I mailed the jetcutter people Mike Minutillo recommended and I'll see what > they can do. I suspect the tolerances I am after are too fine to be done > cheapishly. > > -- > *David Connors* | da...@codify.com | www.codify.com > Software Engineer > Codify Pty Ltd > Phone: +61 (7) 3210 6268 | Facsimile: +61 (7) 3210 6269 | Mobile: +61 417 > 189 363 > V-Card: https://www.codify.com/cards/davidconnors > Address Info: https://www.codify.com/contact