My apologies again, after looking through what I wrote I realized that I
might have been unclear.
Here's the final scoop on merges etc.: CW Pro 4 and CW for Palm R5 _can_ be
merged. However,
and here's the catch: if you perform a merge, you _cannot_ use the
PalmPlugin from Palm's
website nor should you use the Palm R5 patch for the reasons stated below.
In other words,
if you do a CW Pro 4 and CW R5 merge, you are stuck with what you have.
However, you are correct that this bit needs clarification. This will go
onto my To-Do list for the next
rev of the FAQ. Thanks for pointing this out to us.
Rgds,
JK Lam
Metrowerks Technical Support
----- Original Message -----
From: Hardy Macia <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, April 30, 1999 8:52 AM
Subject: Re: CW 4 Pro + CW Palm R5 = Can't debug
> JK Lam,
>
> Thank you for the clarification. The FAQ lead me to believe they could be
> merged and work together and that would be the preferable solution, but I
> can maintain two separate CW installations and that is what I will do. I
> won't waste anymore time trying to get something to work that can't.
>
> I'd suggest updating the Metroworks FAQ for CW Pro 4 and R5 and say they
> can't be merged..
>
> Thanks,
> - Hardy
>
> >Hi Hardy,
> >
> >I'm sorry to have to ask this but: is it possible for you to maintain two
> >separate CW Pro 4 and CW Palm R5 installation folders on your Mac? The
> >reason for it is that R5 (patched) and CW Pro 4 (pre and post-patch) are
on
> >different IDEs and components. Because of the component dependencies it
is
> >not advisable to have both merged using patched components as this may
break
> >for example, MSL on the CW Pro 4 side. (This is why the patch release
notes
> >specify that the patch is _not_ for the merged installations). You will
need
> >the patch debugger from the R5 patch in order to debug to POSE 2.1d26;
the
> >one that ships with R5 is an older version and will not work with 2.1d26.
> >You can still patch either or both CW Pro 4 and CW Palm OS R5, just make
> >sure that the patch installs into the correct folder.
> >
> >I realize that this solution is not ideal and I apologize for any
> >inconvenience this may cause.
> >
> >Rgds,
> >JK Lam
> >Metrowerks Technical Support
> >
> >----- Original Message -----
> >From: Hardy Macia <[EMAIL PROTECTED]>
> >To: <[EMAIL PROTECTED]>
> >Sent: Tuesday, April 27, 1999 9:19 AM
> >Subject: CW 4 Pro + CW Palm R5 = Can't debug
> >
> >
> >> I've done a clean install of CW 4 Pro for the Macintosh and I followed
the
> >> directions for installing CW Palm R5 into an existing CW 4 Pro system.
> >>
> >> I can't debug my program now. CW transfers the app to the emulator
> >> (2.1d26)and hangs at a blank screen. The debugger window in CW never
> >opens.
> >> (An actual Palm III has the same results.)
> >>
> >> I've tried debugging the Memo app that comes in the sample code with
> >> similar results.
> >>
> >> It worked fine before I tried integrating CW 4 Pro. I need CW4Pro for
> >> conduit development so I can't uninstall it.
> >>
> >> I have version 1.3.5 of MetroNum installed.
> >> I have version 1.3.2b2 of PalmPlugin installed.
> >>
> >> Does anyone have CW 4 Pro and CW Palm R5 working together on the Mac?
> >>
> >> - Hardy
> >>
> >>
> >>
> >>
>
>
> Hardy Macia
> Do you care about privacy? Find out what you can do to help protect it.
> Libertarians for Privacy: http://www.catamount.com/rc5/
>
>
>
