A clarification with regards to my last post. -My 8500 SCSI HD is Bus 0, ID 0 and CD-ROM ID 3 -External Zip on Bus1, ID 6 -ATA Maxtor at last check was on Bus 2, ID 2 (according to ASP and Drive Setup) but ID, 0 according to SCSI Probe. I'm quite sure it was ID'd as "0" by ASP back when I first installed it, too. I could not find jumper settings yesterday that would give it a ID of "0" by ASP. I want it set as a master. Nothing else is connected to that ATA bus.
(Not sure how the Floppy drive figures in the mix as it is never ID'd on a SCSI bus and it connects directly to the Mobo with that smaller ribbon cable) Mike -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
