On Sun, Sep 11, 2011 at 5:15 PM, Anthony Farr <farranth...@gmail.com> wrote: > That was an unanticipated consequence of the permissions that I'd set > for this album. The direct links to the pictures don't let you > navigate away from them to other restricted pictures. If you want to > toggle between pictures this link will take you to the album, > https://picasaweb.google.com/FarrAnthony/ShadowBanding?authuser=0&authkey=Gv1sRgCPfPt66UxvTwvQE&feat=directlink > > .... then when you view a picture you'll have the navigation arrows > available. Another lesson I've learned about Picasa.
Oh don't worry: Picasa still sucks rocks. Unfortunately, the image size you're presenting is too small to understand what I'm seeing, but if it's as large as you can post, so be it. >> I capture only with raw format, are you capturing JPEGs? That might be >> the issue. >> > > These are raw captures. The unedited picture is a straight conversion > to jpeg by ACR and PSE8 with the parameters at default (not zero). My > experience is that noise is better controlled when shooting jpeg, but > the reduced exposure latitude and limited recovery potential inherent > in jpeg means I almost never use them, unless an instant result > out-of-the-camera is called for. Is the version of Camera Raw that you are using running process 2010 or process 2003 code? That could be the issue you're seeing. The Camera Raw raw conversion routines were significantly improved with the introduction of Camera Raw v6.x (Process 2010)... i don't know whether that runs in PSE8. Also, PSE8 can only utilize the basic mode operations of Camera Raw ... another thing that might affect this issue. The Advanced mode allows much more finesse in conversion settings and noise reduction processing. As I said in a prior post, there's much more to this than just what sensor is being used in a camera. The whole capture to file to processing chain has to be considered. -- Godfrey godfreydigiorgi.posterous.com -- PDML Pentax-Discuss Mail List PDML@pdml.net http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions.
