DAR wrote: > I have a similar situation to the one just described by gnackwatschn. > One of my players is a squeezelite instance running on a Raspian/RPi4 > device through a hifiberry digi+ card to an old Denon receiver. I had > previously used the IRBlaster plugin (with an SB3 classic and an IR > transmitter) to control the receiver remotely (power on/power off/volume > up/volume down/audio in), but I have recently switched over to a serial > controller device with an ethernet connection that is plugged in to the > RS232 port on the receiver. > > I initially tried using the Denon AVP/AVR Control LMS plugin mentioned > by gnackwatschn, but that had problems controlling volume even through > the default skin on LMS. I switched over to Peter Watkin's DenonSerial > plugin to control my receiver, and that works great through the default > skin. > > My problems arise using the material skin when the volume of the player > is changed. As gnackwatschn mentioned, the audio setting for the player > needs to be at 100% in order for the volume to be controlled by the > receiver. This works fine with the default skin, where clicking the > button on either side of the volume slider (see picture below) causes a > stepwise change in volume, and clicking within the slider causes the > volume to jump to the specified volume. This works similarly with the > iPeng and Squeeze Ctrl apps (in the case of Squeeze Ctrl after setting a > preference to send volume signals even though the player is set to > 100%). > > 32878 > > With the material skin, the slider shows up as "fixed volume", but the > buttons on either side are indeed active (see picture below). > Unfortunately, when I click the left button, the volume jumps to a fixed > high level, and when I click the right button, the volume jumps to a > fixed higher level. Further clicking those buttons doesn't change > anything. > > 32876 > > There is clearly a difference in how the volume controls are sent to the > receiver from the two different skins, but I am not sure how to sort > this out. The Denon controller plugins also clearly impact how the > volume levels are set. I am happy to troubleshoot the situation if > anyone has suggestions. Thanks in advance for your help!
Thank you for your reply, now i know, that I am not the only one with this issue. Maybe it is worth noting: In the meantime I also switched to Denon Serial, because of other issues with volume control in Denon AVP Plugin. The main problem stays the same: With classic web-ui and also with Squeezer app I am able to change the volume of the player, even if it is fixed at 100% in LMS settings. The Denon Serial plugin recognizes these changes and sends it perfectly overt to the avr. ------------------------------------------------------------------------ gnackwatschn's Profile: http://forums.slimdevices.com/member.php?userid=71199 View this thread: http://forums.slimdevices.com/showthread.php?t=109624 _______________________________________________ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
